Hello all, I am trying to use some devices on i2c protocol, one of them is the DS1337 RTC, but I don't know too much about how. I am using the Linux kernel 2.6.15 and a mpc866 processor. I've seen there is a cpm i2c interface for these processors (for a rpx board). However the corresponding code (i2c-algo8xx) doesn't appear in the sources. The i2c-rpx.c just initializes the ioports, the adapter struct and the isr. Maybe I am not understanding the i2c driver right. I am a bit confused about it. Could you give me some help about how it works or what should I have to do?
Thanks in advance. Best regards, Raúl Moreno Clemens Koller <[EMAIL PROTECTED]> Clemens Koller Enviado por: [EMAIL PROTECTED] 29/11/2007 12:24 Para: Alessandro Zummo <[EMAIL PROTECTED]> cc: [EMAIL PROTECTED], linuxppc-embedded@ozlabs.org Asunto: Re: DS1337 RTC on I2C broken. Hello, Allessandro! Alessandro Zummo schrieb: > On Wed, 28 Nov 2007 19:25:00 +0100 > Clemens Koller <[EMAIL PROTECTED]> wrote: > >> Well, as already mentioned, I have problems to get my DS1337 RTC on I2C >> on my MPC8540(ads like) PowerPC working properly on >> latest 2.6.24-rc2-ge6a5c27f kernels. A paulus.git 2.6.21-rc5-g9a5ee4cc >> as well as a 2.6.22-rc6-gb75ae860 is working fine. >> (mainstream's console is broken, so cannot test these, yet.) Just to give you an update: The latest paulus.git as of today (Linux-2.6.24-rc3-g0b47759d) is still broken. Same story as yesterday. Regards, Clemens Koller __________________________________ R&D Imaging Devices Anagramm GmbH Rupert-Mayer-Straße 45/1 Linhof Werksgelände D-81379 München Tel.089-741518-50 Fax 089-741518-19 http://www.anagramm-technology.com _______________________________________________ Linuxppc-embedded mailing list Linuxppc-embedded@ozlabs.org https://ozlabs.org/mailman/listinfo/linuxppc-embedded _______________________________________________ Linuxppc-embedded mailing list Linuxppc-embedded@ozlabs.org https://ozlabs.org/mailman/listinfo/linuxppc-embedded