Hi I'm trying to run a Linux System on a ml310 I'm using the Kernel 2.4.26 from Bitkeeper und and EDK9.1 Sp2 I can compile my Kernel without Errors, with a Crosscompiler made by crosstools, if I don't copy the BSP files in the Kernel Directory. If I do so, I can't compile. It aborts with the error: serial.c:4040: error: 'XPAR_UARTNS550_0_CLOCK_FREQ_HZ' undeclared (first use in this function) If I don't use the UART in my Kernel config I get other errors like: adapter.c:96: error: `XPAR_XEMAC_NUM_INSTANCES' undeclared (first use in this function) I don't really know what to do now. Where should I look for the solution? Did I something wrong by generating the BSP or do I have to use an older version of the edk/ise?
When I was trying to find a solution I read some of the things in this mailing list, and now I'm concered about these 2 points -Board -Kernel Version Is it a good idea to use the ml310? I want a Linux, an ethernet device, a RS232 device and system-ace. Later I would try to patch the Linux with rtai for real-time-support. I read about troubles with the ethernet device on the ml310 because of troubles with the pci bus. Would it be much easier to use an XUP-Board? Would it be easier to use the kernel 2.6.x? Has anybody experience in running an rtai-patched Linux on an ml310 - bzw XUP Board? Greetings & THX Joachim ______________________________________________________________________ XXL-Speicher, PC-Virenschutz, Spartarife & mehr: Nur im WEB.DE Club! Jetzt testen! http://produkte.web.de/club/?mc=021130 _______________________________________________ Linuxppc-embedded mailing list [email protected] https://ozlabs.org/mailman/listinfo/linuxppc-embedded
