On Tue, 19 Feb 2008 14:00:19 +0100 "Nicolas Genevrier" <[EMAIL PROTECTED]> wrote:
> Hello all, > > I noticed an Ethernet blocking on a Yosemite evaluation board when we > are using both Ethernet devices (eth0 and eth1). > To reproduce the issue, I just telnet the board from a PC (PC1) through > eth0 and then telnet another PC (PC2) from the first telnet session > through eth1. Then I display a lot of characters on the last telnet > session: > $ for i in `seq 1 100000`; do echo "$i > aaaaaaaaaaa..(x160)..aaa"; done > > After a while, transmission is blocked and leads to an rxde interruption > from the MAL. > > Yosemite evaluation kit runs Linux 2.16.13 but I reproduced the issue > with our board running Linux-2.6.16 on a 440EP. > In Linux 2.6.16, the new ibm_emac driver tries to recover the error but > Ethernet remains very very slow even one day after the end of the > transmission. > I didn't notice any evolution related to this neither any discussion on > the topic. Sorry if I missed them. > > I am working on the subject but an idea or related information would be > helpful. There was a patch from Wolfgang Ocker recently that fixed some interrupt settings for 440EP in arch/ppc. You might want to look at that. I still need to evaluate if the arch/powerpc port needs fixing. http://patchwork.ozlabs.org/linuxppc/patch?person=1210&id=16789 josh _______________________________________________ Linuxppc-embedded mailing list Linuxppc-embedded@ozlabs.org https://ozlabs.org/mailman/listinfo/linuxppc-embedded