I am using a set top box board : MB442 based on STi7109 chip. I use STAPI (drivers provided by ST) with STlinux kernell. I have some problems with a module (named mme_host) which must be inserted with arguments (insmod mme_host.ko transport0=<arguments_to_be_used>). This operation causes the following error : insmod: error inserting '/home/bakhaled/modules/mme/mme_host.ko': -1 Operation not permitted I tried to insert the module without arguments (insmod mme_host.ko) and this was successful. But when I try to run a test program for video , after inserting that mme module without arguments, the system crash down. (don't execute console commands). Has any one experienced this type of problems? Have you any solutions ? -- View this message in context: http://www.nabble.com/video-driver-problems-on-set-top-box-board-tp16354810p16354810.html Sent from the linuxppc-embedded mailing list archive at Nabble.com.
_______________________________________________ Linuxppc-embedded mailing list Linuxppc-embedded@ozlabs.org https://ozlabs.org/mailman/listinfo/linuxppc-embedded