Hello Sorry for the late reply. I was busy with another project.
I finally got linux 2.6 to boot on HITECH board. Thanks to John Linn for all the pointers to debug the code. I also got the UARTLITE as console working. I had to disable several macros in virtex_devices.c to make the kernel boot. Now I am working on using UART16550 as console which is free at Xilinx after registration. Thanks to Marc and Stephen for the info. --swamy swamydp wrote: > > > I am trying to boot linux 2.6 on HITECH virtex 4(fx60) board. Linux hangs > at address 0xc00045ec which is in the __udelay function. I am using EDK > 9.2i and gcc version 4.0.2 for compiling the kernel. The following is the > boot message from the bootloader. > > loaded at: 00400000 0054E19C > board data at: 0054C120 0054C19C > relocated to: 00404064 004040E0 > zimage at: 00404E55 0054B5B4 > avail ram: 0054F000 02000000 > > Linux/PPC load: console=ttyS0,9600 console=tty0 root=/dev/sda2 > Uncompressing Linux...done. > Now booting the kernel > > Any help is greatly appreciated. I have run out of ideas to fix this. > > Thanks > swamy > > -- View this message in context: http://www.nabble.com/linux-2.6-hangs-at-__delay-function-on-Viretx-4-board-tp17222725p18012972.html Sent from the linuxppc-embedded mailing list archive at Nabble.com. _______________________________________________ Linuxppc-embedded mailing list Linuxppc-embedded@ozlabs.org https://ozlabs.org/mailman/listinfo/linuxppc-embedded
