The only difference I see is the tools, we are using ELDK 4.1 for now. I have tested this on the ML405 in the past, not for a bit as our automated testing uses an NFS root.
Since this is arch/ppc (it appears, no boot line), we have stopped work on this architecture and are now encouraging (maybe a stronger word is needed) you to move to arch/powerpc. The arch/ppc was last stable at git tag last-arch-ppc and I know it started getting more unstable after I started pulling in 2.6.26-rcx. We won't be doing any more changes to arch/ppc. -- John > -----Original Message----- > From: [EMAIL PROTECTED] [mailto:linuxppc-embedded- > [EMAIL PROTECTED] On Behalf Of Grant Likely > Sent: Wednesday, July 09, 2008 8:33 AM > To: neeraj garg > Cc: linuxppc-embedded@ozlabs.org > Subject: Re: Booting ML405 (Kernel panic - not syncing: No init found) > > On Wed, Jul 09, 2008 at 10:24:13AM +0530, neeraj garg wrote: > > Hi, > > > > I am trying to boot ML405 with Linux source code downloaded from > > http://www.git.xilinx.com . My cross compiler tool chain version is > > gcc-3.4.1, glibc-2.3.2 and binutils-2.15. I have also downloaded RAMDISK > > from same url (http://www.git.xilinx.com). When I download > > zImage.initrd.elf using XMD everything goes fine, untill RAMDISK is > > uncompressed, I get following messages : > > > <snip> > > [ 3.736691] Failed to > > execute /sbin/init. Attempting defaults... > > [ 3.748073] Kernel panic - not syncing: No init found. Try passing > > init= option to kernel. > > [ 3.772040] Rebooting in 180 seconds..[ 183.487314] Signal: 8 > > > > Try changing the kernel parameters line to specify init=/bin/sh and see > what happens. > > g. > > _______________________________________________ > Linuxppc-embedded mailing list > Linuxppc-embedded@ozlabs.org > https://ozlabs.org/mailman/listinfo/linuxppc-embedded This email and any attachments are intended for the sole use of the named recipient(s) and contain(s) confidential information that may be proprietary, privileged or copyrighted under applicable law. If you are not the intended recipient, do not read, copy, or forward this email message or any attachments. Delete this email message and any attachments immediately. _______________________________________________ Linuxppc-embedded mailing list Linuxppc-embedded@ozlabs.org https://ozlabs.org/mailman/listinfo/linuxppc-embedded
