On 7/22/08, Albrecht Dreß <[EMAIL PROTECTED]> wrote: > Hi, > > sorry for a somewhat off-topic question... > > I want to design a mpc5200b board which is roughly derived from Freescale's > 5200B Lite demo. Obviously, I have the problem to initially write u-boot > into the boot nor flash. I believe this would be possible using the > jtag/bsm interface (is that true?). > > Can you recommend any good hardware and software solution for that, if > possible running on linux (OSS?)? I don't need a "real" debugger (maybe an > interface to gdb), just something to write the flash, so u-boot comes up.
I haven't tried it, but a Macraigor USB Wiggler supports the MPC5200 and it's $250. http://www.macraigor.com/cpus.htm That should be enough to write uboot into RAM. Once uboot is in RAM you can use it to write the flash. Let me know if you try it and it works. > > Thanks for any help, > Albrecht. > > _______________________________________________ > Linuxppc-embedded mailing list > Linuxppc-embedded@ozlabs.org > https://ozlabs.org/mailman/listinfo/linuxppc-embedded > > -- Jon Smirl [EMAIL PROTECTED] _______________________________________________ Linuxppc-embedded mailing list Linuxppc-embedded@ozlabs.org https://ozlabs.org/mailman/listinfo/linuxppc-embedded
