Hi all, I'm working with PQ2FADS based board. When I started to use new 2.6.26 kernel my SMC1 console stopped working. I know that the cpm_uart driver has been changed and the DTS file needs updating. Unfortunately I failed to get it running. Could somebody help me solve this problem?
==== The cpm node of the DTS file: ............................................. [EMAIL PROTECTED] { #address-cells = <1>; #size-cells = <1>; #interrupt-cells = <2>; compatible = "fsl,mpc8280-cpm", "fsl,cpm2"; reg = <119c0 30>; ranges; muram { #address-cells = <1>; #size-cells = <1>; ranges = <0 0 10000>; [EMAIL PROTECTED] { compatible = "fsl,cpm-muram-data"; reg = <0 2000 9800 800>; }; }; [EMAIL PROTECTED] { compatible = "fsl,cpm-brg", "fsl,cpm2-brg"; reg = <119f0 10 115f0 10>; }; smc1: [EMAIL PROTECTED] { device_type = "serial"; compatible = "fsl,cpm2-smc-uart"; reg = <11a80 20 87fc 2>; interrupts = <4 8>; interrupt-parent = <&PIC>; fsl,cpm-brg = <7>; fsl,cpm-command = <1d000000>; }; }; ............................................. chosen { linux,stdout-path = &smc1; bootargs = "console=ttyCPM0"; }; ............................................. The early debuging output: Xid mach(): done MMU:enter MMU:hw init MMU:mapin MMU:setio MMU:exit Using Electronic Devices SPC826 (M82) machine description Linux version 2.6.26 ([EMAIL PROTECTED]) (gcc version 4.1.2) #83 Thu Jul 24 14:45:07 MSD 2008 console [udbg0] enabled Entering add_active_range(0, 0, 4096) 0 entries of 256 used setup_arch: bootmem spc826_setup_arch() spc826_setup_arch(), finish arch: exit Top of RAM: 0x1000000, Total RAM: 0x1000000 Memory hole size: 0MB Zone PFN ranges: DMA 0 -> 4096 Normal 4096 -> 4096 Movable zone start PFN for each node early_node_map[1] active PFN ranges 0: 0 -> 4096 On node 0 totalpages: 4096 DMA zone: 32 pages used for memmap DMA zone: 0 pages reserved DMA zone: 4064 pages, LIFO batch:0 Normal zone: 0 pages used for memmap Movable zone: 0 pages used for memmap Built 1 zonelists in Zone order, mobility grouping off. Total pages: 4064 Kernel command line: console=ttyCPM0 PID hash table entries: 64 (order: 6, 256 bytes) time_init: decrementer frequency = 16.500000 MHz time_init: processor frequency = 264.000000 MHz clocksource: timebase mult[f26c9b2] shift[22] registered clockevent: decrementer mult[439] shift[16] cpu[0] Console: colour dummy device 80x25 ==== Thanks! _______________________________________________ Linuxppc-embedded mailing list Linuxppc-embedded@ozlabs.org https://ozlabs.org/mailman/listinfo/linuxppc-embedded