Hi,
I am trying to get PCI support on the ML310. I was able to port Linux
2.6 (linux-2.6-virtex from Secret Lab) onto the board, but unfortunately
there is no PCI support in the kernel. When I enabled PCI support, I got
the same errors (see below) that were reported on the Secret Lab Wiki.
CC arch/ppc/syslib/ppc4xx_setup.o
arch/ppc/syslib/ppc4xx_setup.c: In function `ppc4xx_map_io':
arch/ppc/syslib/ppc4xx_setup.c:118: error: `PPC4xx_PCI_IO_VADDR'
undeclared (first use in this function)
arch/ppc/syslib/ppc4xx_setup.c:118: error: (Each undeclared identifier
is reported only once
arch/ppc/syslib/ppc4xx_setup.c:118: error: for each function it appears in.)
arch/ppc/syslib/ppc4xx_setup.c:119: error: `PPC4xx_PCI_IO_PADDR'
undeclared (first use in this function)
arch/ppc/syslib/ppc4xx_setup.c:119: error: `PPC4xx_PCI_IO_SIZE'
undeclared (first use in this function)
arch/ppc/syslib/ppc4xx_setup.c:120: error: `PPC4xx_PCI_CFG_VADDR'
undeclared (first use in this function)
arch/ppc/syslib/ppc4xx_setup.c:121: error: `PPC4xx_PCI_CFG_PADDR'
undeclared (first use in this function)
arch/ppc/syslib/ppc4xx_setup.c:121: error: `PPC4xx_PCI_CFG_SIZE'
undeclared (first use in this function)
arch/ppc/syslib/ppc4xx_setup.c:122: error: `PPC4xx_PCI_LCFG_VADDR'
undeclared (first use in this function)
arch/ppc/syslib/ppc4xx_setup.c:123: error: `PPC4xx_PCI_LCFG_PADDR'
undeclared (first use in this function)
arch/ppc/syslib/ppc4xx_setup.c:123: error: `PPC4xx_PCI_LCFG_SIZE'
undeclared (first use in this function)
make[1]: *** [arch/ppc/syslib/ppc4xx_setup.o] Error 1
make: *** [arch/ppc/syslib] Error 2
I went back to Linux 2.4 (v2.4.20_mvl31-ml300), but the system hangs
during ml310_init( ), specifically when it gets to pci_init( ), in
ml310.c. I put some print statements in ml310.c to debug and found out
that it gets pass the first two lines in pci_init( ) before hanging.
Basically, all I get on my screen is:
Xilinx ML310 Board-Specific Initialization:
ml310_init( ) looks like this:
void
ml310_init()
{
prints("\n\n");
prints("Xilinx ML310 Board-Specific Initialization:\n");
prints("\n");
pci_init();
ppb_init(9);
pci_scan();
sio_init();
sbr_init();
};
and pci_init( ) looks like this:
void
pci_init()
{
/* self-configuration */
WR32(PCI_CONFIG_ADDR, htole32(0x80004004)); // address
WR32(PCI_CONFIG_DATA, htole32(0xffff0147)); // data
/* max latency timer on bridge */
WR32(PCI_CONFIG_ADDR, htole32(0x8000400c)); // address
WR32(PCI_CONFIG_DATA, htole32(0x0000ff00)); // data
/* max bus number */
WR32(PCI_CONFIG_ADDR+8, htole32(0xff000000));
};
ml310.c was generated when I made the BSP in Xilinx EDK 9.1. I copied
it, along with the other files from the BSP, into the kernel source. I
am using a Crosstool cross-compiler, gcc-3.4.1-glibc-2.3.3. I have also
tried the linuxppc-2.4 and mvistappc_2_4_devel kernels from
source.mvista.com, but those both crashed with similar (and several)
errors concerning ide-taskfile.c during compilation.
Is anybody aware of how to manually map the PCI constants in 2.6 and
willing to help me map them? Does anybody have an idea why pci_init( )
is getting stuck? Any suggestions, in general, would be greatly appreciated.
Let me know if I need to provide more information or code. Thanks!
-Juliana
_______________________________________________
Linuxppc-embedded mailing list
Linuxppc-embedded@ozlabs.org
https://ozlabs.org/mailman/listinfo/linuxppc-embedded