Hi,
I port the linux on my ml300 board , the system is work well. But
have some small problem.
I want use serial port as input device and use VGA as display.
How i set the console parameter?
If i set console like this " console=ttyUL0,9600 console=tty0
root=/dev/ram". The boot message display on both of serial port and
VGA. But when the system come to the "sh".There is no output on ttyUL0
,.All message display on the VGA , then Icann't input command by
serial port .
How to slove this probelm?
regards:)
yanlong
_______________________________________________
Linuxppc-embedded mailing list
Linuxppc-embedded@ozlabs.org
https://ozlabs.org/mailman/listinfo/linuxppc-embedded