Marco Stornelli wrote: > Hi Dave, > > if I well understood you've done a "manual" operation very ugly. You can > adjust the default settings in the kernel menu under device > drivers/block devices and set the number of ramdisk device and the > default size. You can use even the kernel command line option > "ramdisk_size" to tell to the kernel the size of the ramdisk size you > are using. > > Regards. >
Hi Marco, Thanks for the reply. I believe the ramdisk settings are OK, but I'll post them later to confirm. I did try changing those settings, but that didn't help. Is the kernel command-line option "ramdisk_size" or "ramdisk-size" for 2.6.18? Thanks, Dave > > Dave Littell ha scritto: >> Hi all, >> >> I believe my initramfs has grown beyond some limit, but I'm at a loss to >> know how to correct it. We recognized that we would have to allow a >> larger initramfs than the defaults provided, so I modified the following >> (on a 2.6.18 kernel): >> >> 1. .../arch/powerpc/boot/wrapper: A "-Ttext=0x1000000" was added to the >> ld args. >> >> 2. .../arch/powerpc/boot/zImage.lds.S: The ALIGN() directive was changed >> to use 16 instead of 4. >> >> I thought I was finished and everything seemed to be working well with >> an initramfs CPIO archive size of approx. 9 MB. However, we just had >> another size increase (to a CPIO archive size of approx. 12 MB) and now >> I'm rewarded with this at boot: >> >> ## Booting image at 08000000 ... >> Image Name: Linux-2.6.18_pro500-440epx_eval >> Image Type: PowerPC Linux Kernel Image (gzip compressed) >> Data Size: 7113720 Bytes = 6.8 MB >> Load Address: 01000000 >> Entry Point: 01000410 >> Verifying Checksum ... OK >> Uncompressing Kernel Image ... OK >> CPU clock-frequency <- 0x27bc86ae (667MHz) >> CPU timebase-frequency <- 0x27bc86ae (667MHz) >> /plb: clock-frequency <- 9ef21ab (167MHz) >> /plb/opb: clock-frequency <- 4f790d5 (83MHz) >> /plb/opb/ebc: clock-frequency <- 34fb5e3 (56MHz) >> /plb/opb/[EMAIL PROTECTED]: clock-frequency <- a8c000 (11MHz) >> /plb/opb/[EMAIL PROTECTED]: clock-frequency <- a8c000 (11MHz) >> /plb/opb/[EMAIL PROTECTED]: clock-frequency <- a8c000 (11MHz) >> /plb/opb/[EMAIL PROTECTED]: clock-frequency <- a8c000 (11MHz) >> Memory <- <0x0 0x0 0x10000000> (256MB) >> ENET0: local-mac-address <- 00:80:3f:0d:80:0d >> ENET1: local-mac-address <- 79:60:04:ea:d9:a1 >> >> zImage starting: loaded at 0x01000000 (sp: 0x0ff182e8) >> Allocating 0x904dc0 bytes for kernel ... >> gunzipping (0x00000000 <- 0x0100d000:0x01912c90)...done 0x8de100 bytes >> >> Linux/PowerPC load: console=ttyS0,115200 console=ttyMTD3 >> Finalizing device tree... flat tree at 0x191f3a0 >> >> Here it sits, forever. I poked around a bit with the JTAG and found (in >> one instance) that probe_machine() (from setup_common.c) was taking a >> DataTLBError exception because it appears the machine descriptors are >> scrubbed to 0. I added some debug code to setup_common.c, but on the >> next attempted boot the JTAG showed that DataTLBError exceptions in >> identify_cpu() (cputable.c). >> >> If I reduce the size of initramfs back to it's original size the system >> runs just fine. So, I'm guessing the larger initramfs is somehow >> stomping on something, but have no idea how to proceed to resolve this. >> >> >> Thanks very much, >> Dave >> >> >> _______________________________________________ >> Linuxppc-embedded mailing list >> Linuxppc-embedded@ozlabs.org >> https://ozlabs.org/mailman/listinfo/linuxppc-embedded >> >> > _______________________________________________ Linuxppc-embedded mailing list Linuxppc-embedded@ozlabs.org https://ozlabs.org/mailman/listinfo/linuxppc-embedded