Try ARCH=powerpc (lowercase). Regards.
VenkataKrishna ha scritto: > > > I compiled modules in ELDK 4.0 installed in Linux. I got the configure > error in show in the below. How to solve that. What are configure values > should need compile MPC8260 freescale device driver in linux. > > > > [EMAIL PROTECTED] linux-2.6-denx]# make ARCH=PowerPC CROSS_COMPILE=ppc_82xx- > modules > > :0: error: -m64 not supported in this configuration > > :0: error: -m64 not supported in this configuration > > /opt/eldk/usr/src/linux-2.6-denx/scripts/gcc-version.sh: line 31: printf: #: > invalid number/opt/eldk/usr/src/linux-2.6-denx/scripts/gcc-version.sh: line > 31: printf: #: invalid number/bin/sh: line 1: [: too many arguments > > scripts/kconfig/conf -s arch/powerpc/Kconfig > > * > > * Restart config... > > * > > * > > * Linux Kernel Configuration > > * > > 64-bit kernel (PPC64) [N/y/?] (NEW) > > > > > > With Regards > > > > Venkatakrishna Pari > > > > > ------------------------------------------------------------------------ > > _______________________________________________ > Linuxppc-embedded mailing list > Linuxppc-embedded@ozlabs.org > https://ozlabs.org/mailman/listinfo/linuxppc-embedded -- Marco Stornelli Embedded Software Engineer CoRiTeL - Consorzio di Ricerca sulle Telecomunicazioni http://www.coritel.it [EMAIL PROTECTED] +39 06 72582838 _______________________________________________ Linuxppc-embedded mailing list Linuxppc-embedded@ozlabs.org https://ozlabs.org/mailman/listinfo/linuxppc-embedded