On Sat, Nov 15, 2008 at 6:02 PM, Nicholas Mc Guire <[EMAIL PROTECTED]> wrote:
> > > > > > > I mount my ext2.img and run ls -l and I get > > > > crw-r----- 1 root root 5, 1 2008-11-15 02:24 console > > > > I think is not ok ?! > > > > > > thats fine - so that should not be your problem. > > what is the console device set to ? can you pass it an explicid > > console=/dev/ttyS0 or the like to map it to a device that exists for sure > and is in /dev/ ? off course you also have to check that the driver > support is in the kernel. > > hofrat I've managed to solve my problem. I took a clean ramdisk (that came with the ELDK) mount it , added my needed libs, devs and test apps , then generated an ramdisk.img (using genext2fs) , compressed it and then created an uBoot image file. The modified rootfs is now on my USB Flash stick and it works. My USB Flash rootfs is loaded properly by the kernel and related to my initial problem, to be more specific, I've created a root filesystem on my USB Flash stick where I added the xenomai dir (including /bin /lib /include...) generated during the Xenomai (from the trunk) install and also the devices rtheap rtp0... in the /dev directory of my FS. I also used the proper libc-2.6 standard shared libraries so the dynamic linker does't send a SIGSEGV anymore and I am able now to run ./latency or ./cyclictest). I don't receive SegFault anymore. Thanks to all, Cristian
_______________________________________________ Linuxppc-embedded mailing list Linuxppc-embedded@ozlabs.org https://ozlabs.org/mailman/listinfo/linuxppc-embedded