> > > The management interface follows the IEEE standard. > > Please follow the standard, and do not add values that break the > standard. > > Yes, this is an absolute no-go. >
We have used the Reserved range which is meant for implementation-specific. There are many Management TLVs added to this reserved range. So we followed the same practice to add the TLVs for providing better visibility of the system and we are planning to add more as it is meant for implementation specific. Thanks, Devasish Dey Vice President Engineering Product Development | SyncMonk Technologies Pvt Limited +91-783-8079202 [email protected] www.syncmonk.net On Sun, 9 Oct 2022 at 04:28, Richard Cochran <[email protected]> wrote: > On Wed, Aug 24, 2022 at 03:31:44PM +0200, Erez wrote: > > On Wed, 24 Aug 2022 at 12:37, SyncMonk Technologies < > [email protected]> > > wrote: > > > > > - adding sync receipt timeout, delay response timeout and signal fail > > > support to portDS as per G.8275.2. > > > - This also sets the signal fail condition for timeout. > > > > > > > The management interface follows the IEEE standard. > > Please follow the standard, and do not add values that break the > standard. > > Yes, this is an absolute no-go. > > Thanks, > Richard > > > _______________________________________________ > Linuxptp-devel mailing list > [email protected] > https://lists.sourceforge.net/lists/listinfo/linuxptp-devel > --
_______________________________________________ Linuxptp-devel mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/linuxptp-devel
