To converge faster, set step_threshold to a non-zero value. On Thu, Nov 3, 2022 at 9:38 PM ramesh t via Linuxptp-devel <linuxptp-devel@lists.sourceforge.net> wrote: > > Hi, > > Observed a issue where PTP is running is fine with single digit rms value. > Due to error in switch/GM, there is wrong time update towards the ptp4l. This > results in wrong update on PHC time on the NIC. PHC time seems to be set to > 1970 or 2070 timeframe may be due to error condition in ptp4l. Though the GM > or switch starts sending proper time in sometime, PHC time on the NIC doesn't > get corrected. > > Quick Question: > Is there any fix provided in the latest code which handles case where > GM/Switch send wrong time momentarily? > After GM/switch recovered to proper time, is there a way for PHC to converge > faster to proper time? > > Please suggest. > > regards, > Ramesh > > > _______________________________________________ > Linuxptp-devel mailing list > Linuxptp-devel@lists.sourceforge.net > https://lists.sourceforge.net/lists/listinfo/linuxptp-devel >
_______________________________________________ Linuxptp-devel mailing list Linuxptp-devel@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/linuxptp-devel
