I am using ptp4l with version 1.6-00002-g999c86f. This is my startline:
/home/test/linuxptp/ptp4l -E -4 -H -i p1p1 The network card is a Intel 82574L with the following time capabilites: Time stamping parameters for p1p1: Capabilities: hardware-transmit (SOF_TIMESTAMPING_TX_HARDWARE) software-transmit (SOF_TIMESTAMPING_TX_SOFTWARE) hardware-receive (SOF_TIMESTAMPING_RX_HARDWARE) software-receive (SOF_TIMESTAMPING_RX_SOFTWARE) software-system-clock (SOF_TIMESTAMPING_SOFTWARE) hardware-raw-clock (SOF_TIMESTAMPING_RAW_HARDWARE) PTP Hardware Clock: 0 Hardware Transmit Timestamp Modes: off (HWTSTAMP_TX_OFF) on (HWTSTAMP_TX_ON) Hardware Receive Filter Modes: none (HWTSTAMP_FILTER_NONE) all (HWTSTAMP_FILTER_ALL) ptpv1-l4-sync (HWTSTAMP_FILTER_PTP_V1_L4_SYNC) ptpv1-l4-delay-req (HWTSTAMP_FILTER_PTP_V1_L4_DELAY_REQ) ptpv2-l4-sync (HWTSTAMP_FILTER_PTP_V2_L4_SYNC) ptpv2-l4-delay-req (HWTSTAMP_FILTER_PTP_V2_L4_DELAY_REQ) ptpv2-l2-sync (HWTSTAMP_FILTER_PTP_V2_L2_SYNC) ptpv2-l2-delay-req (HWTSTAMP_FILTER_PTP_V2_L2_DELAY_REQ) ptpv2-event (HWTSTAMP_FILTER_PTP_V2_EVENT) ptpv2-sync (HWTSTAMP_FILTER_PTP_V2_SYNC) ptpv2-delay-req (HWTSTAMP_FILTER_PTP_V2_DELAY_REQ) Do I need to use phc2sys on the master too to syncronize the time between the network clock and CLOCK_REALTIME? Or is ptp4l already doing that? ------------------------------------------------------------------------------ Transform Data into Opportunity. Accelerate data analysis in your applications with Intel Data Analytics Acceleration Library. Click to learn more. http://makebettercode.com/inteldaal-eval _______________________________________________ Linuxptp-users mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/linuxptp-users
