On Fri, May 18, 2018 at 12:18:52PM -0500, Chris Caudle wrote: > I am still experimenting with my PTP master, so I wanted to have my > workstation sync to the PTP master when it was running, but fail over to > network NTP if the PTP master shuts down, which is my understanding of > what using the timemaster program should allow. So first, is that a > correct understanding on my part?
Yes. > This is the contents in timemaster/ptp4l.0.conf: > $ less /var/run/timemaster/ptp4l.0.conf > [global] > include /etc/ptp4l.conf ptp4l doesn't support an include directive. There should be an error message in the system log pointing to the line which caused the parser to fail. You will need to include the settings from the file in timemaster.conf prefixed with "ptp4l_option". -- Miroslav Lichvar ------------------------------------------------------------------------------ Check out the vibrant tech community on one of the world's most engaging tech sites, Slashdot.org! http://sdm.link/slashdot _______________________________________________ Linuxptp-users mailing list Linuxptp-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/linuxptp-users
