Hi Miroslav, I will Check the same in driver side , Meanwhile could you please suggest if there are any config changes in slave ( Servo Options ) could improve master offset in slave!
# Servo Options # pi_proportional_const 0.0 pi_integral_const 0.0 pi_proportional_scale 0.0 pi_proportional_exponent -0.3 pi_proportional_norm_max 0.7 pi_integral_scale 0.0 pi_integral_exponent 0.4 pi_integral_norm_max 0.3 step_threshold 0.0 first_step_threshold 0.00002 max_frequency 900000000 clock_servo pi sanity_freq_limit 200000000 ntpshm_segment 0 msg_interval_request 0 servo_num_offset_values 10 servo_offset_threshold 0 write_phase_mode 0 # Thanks, Raj On Tue, Jun 22, 2021 at 6:22 PM Miroslav Lichvar <mlich...@redhat.com> wrote: > On Tue, Jun 22, 2021 at 06:09:41PM +0530, Raj kishore Chhatoi wrote: > > Hi Miroslav, > > > > We are not using any switch between master & slave . Masters & slaves are > > connected via the Media converters. Master & slave both are connected on > > the same network. I configured phc2sys (below cmd) in the slave device > > Ok, I guess it's an issue with the hardware or maybe driver. > > If you responded to the list, you might get other suggestions. > > -- > Miroslav Lichvar > > -- With Regards Raj Kishore Chhatoi. Mob: +91-8608747611
_______________________________________________ Linuxptp-users mailing list Linuxptp-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/linuxptp-users
