Hello, I just wanted to follow up and see if there was any resource that pointed out what each Parameter definition was for the PMC management IDs. The resource I found only pointed out a handful.
Typing "pmc help" as root didn't provide much additional info at all and neither did the pmc kernel pages (https://linux.die.net/man/8/pmc) Thanks Ben Chang -----Original Message----- From: Chang, Benjamin via Linuxptp-users <linuxptp-users@lists.sourceforge.net> Sent: Sunday, August 15, 2021 10:21 AM To: Richard Cochran <richardcoch...@gmail.com> Cc: linuxptp-users@lists.sourceforge.net Subject: Re: [Linuxptp-users] PMC Management ID Parameters Apologies. I was worried about spamming the list. Thanks Ben Chang -----Original Message----- From: Richard Cochran <richardcoch...@gmail.com> Sent: Saturday, August 14, 2021 11:04 AM To: Chang, Benjamin <benjamin.ch...@gtri.gatech.edu> Subject: Re: [Linuxptp-users] PMC Management ID Parameters If you would like to continue the discussion, then you must always keep the list on CC. Thanks, Richard On Fri, Aug 13, 2021 at 11:34:35AM +0000, Chang, Benjamin wrote: > When I type in pmc help, I just get a list of commands, but no parameter > definitions (see attached). I've even tried after (i.e. pmc -u -b 0 'GET > TIME_STATUS_NP' help), but I still just get the same output. > > From typing in all the management ID parameters, I don't have the > definition of things like master_offset, ingress_time, > cumulativeScaledRateOffset, etc. as well as don't know their scale > (are the values nanoseconds, microseconds, seconds, etc.) > > Thanks > Ben Chang > > -----Original Message----- > From: Richard Cochran <richardcoch...@gmail.com> > Sent: Thursday, August 12, 2021 10:38 PM > To: Chang, Benjamin <benjamin.ch...@gtri.gatech.edu> > Cc: linuxptp-users@lists.sourceforge.net > Subject: Re: [Linuxptp-users] PMC Management ID Parameters > > On Thu, Aug 12, 2021 at 01:10:24PM +0000, Chang, Benjamin via Linuxptp-users > wrote: > > Hello, > > > > I am trying to understand the Management ID parameters. I can't seem to > > find any definitions for them except for the couple listed here > > (stepsRemoved, offsetFromMaster, etc.) > > https://access.redhat.com/documentation/en-us/red_hat_enterprise_linux/7/html/system_administrators_guide/ch-configuring_ptp_using_ptp4l. > > > > Is there any documentation on what the other fields are? > > pmc is an interactive program. > > Type "help" to get a list of supported commands. > > Thanks, > Richard _______________________________________________ Linuxptp-users mailing list Linuxptp-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/linuxptp-users _______________________________________________ Linuxptp-users mailing list Linuxptp-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/linuxptp-users
