Hi, I am trying to use ptp4l combined with synce. Thus I am using nullf servo. Configuring: I keep getting the fault messages below. Q: Is this expected? Am I missing some configurations?
Configuration: [global] dataset_comparison G.8275.x G.8275.defaultDS.localPriority 128 maxStepsRemoved 255 logAnnounceInterval -3 logSyncInterval -4 logMinDelayReqInterval -4 #serverOnly 0 G.8275.portDS.localPriority 128 #ptp_dst_mac 01:80:C2:00:00:0E network_transport L2 domainNumber 24 tx_timestamp_timeout 30 clock_servo nullf step_threshold 0.000000001 Output: port 1: SLAVE to UNCALIBRATED on SYNCHRONIZATION_FAULT rms 4 max 10 freq +0 +/- 0 delay 7173 +/- 0 port 1: UNCALIBRATED to SLAVE on MASTER_CLOCK_SELECTED port 1: SLAVE to UNCALIBRATED on SYNCHRONIZATION_FAULT port 1: UNCALIBRATED to SLAVE on MASTER_CLOCK_SELECTED rms 4 max 7 freq +0 +/- 0 delay 7172 +/- 0 port 1: SLAVE to UNCALIBRATED on SYNCHRONIZATION_FAULT port 1: UNCALIBRATED to SLAVE on MASTER_CLOCK_SELECTED port 1: SLAVE to UNCALIBRATED on SYNCHRONIZATION_FAULT rms 4 max 9 freq +0 +/- 0 delay 7172 +/- 0 rms 5 max 11 freq +0 +/- 0 port 1: UNCALIBRATED to SLAVE on MASTER_CLOCK_SELECTED port 1: SLAVE to UNCALIBRATED on SYNCHRONIZATION_FAULT rms 4 max 8 freq +0 +/- 0 delay 7173 +/- 0 rms 4 max 9 freq +0 +/- 0 delay 7174 +/- 0 port 1: UNCALIBRATED to SLAVE on MASTER_CLOCK_SELECTED port 1: SLAVE to UNCALIBRATED on SYNCHRONIZATION_FAULT rms 4 max 8 freq +0 +/- 0 delay 7175 +/- 0 port 1: UNCALIBRATED to SLAVE on MASTER_CLOCK_SELECTED port 1: SLAVE to UNCALIBRATED on SYNCHRONIZATION_FAULT port 1: UNCALIBRATED to SLAVE on MASTER_CLOCK_SELECTED port 1: SLAVE to UNCALIBRATED on SYNCHRONIZATION_FAULT rms 5 max 10 freq +0 +/- 0 delay 7174 +/- 1 port 1: UNCALIBRATED to SLAVE on MASTER_CLOCK_SELECTED port 1: SLAVE to UNCALIBRATED on SYNCHRONIZATION_FAULT rms 4 max 9 freq +0 +/- 0 delay 7174 +/- Thanks, Aya _______________________________________________ Linuxptp-users mailing list Linuxptp-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/linuxptp-users
