> HW: ARMv8 Cortex-A53 processor (quad-core) in the Stratix10 SoC FPGA > > Driver: intel_fpga_qse_ll (10gb/s)
It seems to be an out-of-tree driver. Try increasing tx_timestamp_timeout. If that doesn't help, you will need to ask the vendor or where you got the driver to look at the issue you have with missing TX timestamps. -- Miroslav Lichvar On Tue, 9 Aug 2022 at 13:55, Gururaj Badiger <gururaj.badi...@gmail.com> wrote: > Hi Miroslav Lichvar, > > Here is the HW and Driver info, > > HW: ARMv8 Cortex-A53 processor (quad-core) in the Stratix10 SoC FPGA > > Driver: intel_fpga_qse_ll (10gb/s) > > > -Guru > > On Mon, 8 Aug 2022 at 15:57, Gururaj Badiger <gururaj.badi...@gmail.com> > wrote: > >> >> >> On Mon, 8 Aug 2022 at 15:38, Miroslav Lichvar <mlich...@redhat.com> >> wrote: >> >>> On Mon, Aug 08, 2022 at 03:29:26PM +0530, Gururaj Badiger wrote: >>> > Is the server configured with the same logAnnounceInterval?: >>> > <guru> Do you mean both Leader and Follower config files should be >>> > configured with the same Sync and Announce interval values? >>> >>> The announce interval needs to be the same in the whole PTP domain. >>> The sync interval doesn't have to be, but usually it is. >>> <guru> I tried to keep both Client and Server same but I didnt see any >>> improvement. >> >> >> >>> >>> > Client log meaning, are you asking console logs on Leader? >>> >>> I think client is follower in the leader/follower terminology (we use >>> the server/client terminology in linuxptp). >>> >> ok Client log is as below: >> >> ptp4l[252579.286]: port 2: master state recommended in slave only mode >> ptp4l[252579.286]: port 2: defaultDS.priority1 probably misconfigured >> ptp4l[252579.786]: selected local clock ced607.fffe.20f9e8 as best master >> ptp4l[252579.786]: port 2: assuming the grand master role >> ptp4l[252579.786]: port 2: master state recommended in slave only mode >> ptp4l[252579.786]: port 2: defaultDS.priority1 probably misconfigured >> ptp4l[252580.182]: selected local clock ced607.fffe.20f9e8 as best master >> ptp4l[252580.182]: port 2: assuming the grand master role >> ptp4l[252580.182]: port 2: master state recommended in slave only mode >> ptp4l[252580.182]: port 2: defaultDS.priority1 probably misconfigured >> ptp4l[252580.346]: selected best master clock 080011.fffe.21b927 >> ptp4l[252580.346]: updating UTC offset to 37 >> ptp4l[252580.346]: port 1: LISTENING to UNCALIBRATED on RS_SLAVE >> ptp4l[252580.346]: port 2: master state recommended in slave only mode >> ptp4l[252580.346]: port 2: defaultDS.priority1 probably misconfigured >> ptp4l[252580.373]: port 1: minimum delay request interval 2^-4 >> ptp4l[252580.534]: rms 1659701576982259968 max 1659701576982259968 freq >> +0 +/- 0 delay 7588 +/- 0 >> ptp4l[252580.659]: rms 1659701576982259968 max 1659701576982259968 freq >> -24 +/- 24 delay 7625 +/- 5 >> ptp4l[252580.722]: port 1: UNCALIBRATED to SLAVE on MASTER_CLOCK_SELECTED >> ptp4l[252580.784]: rms 1890 max 2008 freq -3367 +/- 109 delay 7613 +/- >> 0 >> ptp4l[252580.908]: rms 1493 max 1598 freq -3042 +/- 107 delay 7612 +/- >> 0 >> ptp4l[252581.034]: rms 1101 max 1185 freq -2647 +/- 92 delay 7604 +/- >> 5 >> ptp4l[252581.156]: port 1: SLAVE to LISTENING on >> ANNOUNCE_RECEIPT_TIMEOUT_EXPIRES >> ptp4l[252581.156]: selected local clock ced607.fffe.20f9e8 as best master >> ptp4l[252581.156]: port 2: assuming the grand master role >> ptp4l[252581.156]: port 2: master state recommended in slave only mode >> ptp4l[252581.156]: port 2: defaultDS.priority1 probably misconfigured >> ptp4l[252581.595]: selected local clock ced607.fffe.20f9e8 as best master >> ptp4l[252581.595]: port 2: assuming the grand master role >> ptp4l[252581.595]: port 2: master state recommended in slave only mode >> ptp4l[252581.595]: port 2: defaultDS.priority1 probably misconfigured >> ptp4l[252581.986]: selected local clock ced607.fffe.20f9e8 as best master >> ptp4l[252581.986]: port 2: assuming the grand master role >> ptp4l[252581.986]: port 2: master state recommended in slave only mode >> ptp4l[252581.986]: port 2: defaultDS.priority1 probably misconfigured >> ptp4l[252582.346]: selected best master clock 080011.fffe.21b927 >> ptp4l[252582.346]: updating UTC offset to 37 >> ptp4l[252582.346]: port 1: LISTENING to UNCALIBRATED on RS_SLAVE >> ptp4l[252582.346]: port 2: master state recommended in slave only mode >> ptp4l[252582.346]: port 2: defaultDS.priority1 probably misconfigured >> ptp4l[252582.471]: rms 1820 max 2447 freq +433 +/- 2732 delay 7574 +/- >> 38 >> ptp4l[252582.471]: port 1: UNCALIBRATED to SLAVE on MASTER_CLOCK_SELECTED >> ptp4l[252582.597]: rms 2137 max 2258 freq +2983 +/- 102 delay 7590 +/- >> 0 >> ptp4l[252582.722]: rms 1720 max 1779 freq +2674 +/- 15 delay 7652 +/- >> 6 >> ptp4l[252582.846]: rms 1379 max 1453 freq +2415 +/- 58 delay 7671 +/- >> 0 >> ptp4l[252582.890]: port 1: SLAVE to LISTENING on >> ANNOUNCE_RECEIPT_TIMEOUT_EXPIRES >> ptp4l[252582.890]: selected local clock ced607.fffe.20f9e8 as best master >> ptp4l[252582.890]: port 2: assuming the grand master role >> ptp4l[252582.890]: port 2: master state recommended in slave only mode >> ptp4l[252582.890]: port 2: defaultDS.priority1 probably misconfigured >> ptp4l[252583.390]: selected local clock ced607.fffe.20f9e8 as best master >> ptp4l[252583.390]: port 2: assuming the grand master role >> ptp4l[252583.390]: port 2: master state recommended in slave only mode >> ptp4l[252583.390]: port 2: defaultDS.priority1 probably misconfigured >> ptp4l[252583.869]: selected local clock ced607.fffe.20f9e8 as best master >> ptp4l[252583.869]: port 2: assuming the grand master role >> ptp4l[252583.869]: port 2: master state recommended in slave only mode >> ptp4l[252583.870]: port 2: defaultDS.priority1 probably misconfigured >> ptp4l[252584.247]: selected local clock ced607.fffe.20f9e8 as best master >> ptp4l[252584.247]: port 2: assuming the grand master role >> ptp4l[252584.247]: port 2: master state recommended in slave only mode >> ptp4l[252584.247]: port 2: defaultDS.priority1 probably misconfigured >> ptp4l[252584.346]: selected best master clock 080011.fffe.21b927 >> ptp4l[252584.346]: updating UTC offset to 37 >> ptp4l[252584.346]: port 1: LISTENING to UNCALIBRATED on RS_SLAVE >> ptp4l[252584.346]: port 2: master state recommended in slave only mode >> ptp4l[252584.346]: port 2: defaultDS.priority1 probably misconfigured >> ptp4l[252584.513]: clockcheck: clock jumped backward or running slower >> than expected! >> ptp4l[252584.534]: rms 2538 max 2634 freq +2357 +/- 0 delay 7678 +/- >> 4 >> ptp4l[252584.659]: clockcheck: clock jumped forward or running faster >> than expected! >> ptp4l[252584.660]: rms 2829 max 2880 freq +2357 +/- 0 delay 7676 +/- >> 2 >> ptp4l[252584.787]: port 1: UNCALIBRATED to LISTENING on >> ANNOUNCE_RECEIPT_TIMEOUT_EXPIRES >> ptp4l[252584.788]: selected local clock ced607.fffe.20f9e8 as best master >> ptp4l[252584.788]: port 2: assuming the grand master role >> ptp4l[252584.788]: port 2: master state recommended in slave only mode >> ptp4l[252584.788]: port 2: defaultDS.priority1 probably misconfigured >> ptp4l[252585.213]: selected local clock ced607.fffe.20f9e8 as best master >> ptp4l[252585.213]: port 2: assuming the grand master role >> ptp4l[252585.213]: port 2: master state recommended in slave only mode >> ptp4l[252585.213]: port 2: defaultDS.priority1 probably misconfigured >> >> > <guru> Here is the console log on Leader shell: >>> >>> Your log shows many tx timestamp timeouts, so that needs to be >>> resolved first. What hardware and driver are you using? >>> <guru> I'm not if I understand this question. Is there a command to get >>> the driver info? >>> -- >>> Miroslav Lichvar >>> >>>
_______________________________________________ Linuxptp-users mailing list Linuxptp-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/linuxptp-users
