Dear, We want to use Linuxptp by configuring our device as follows:
Master(192.168.1.100) Slave1 (192.168.1.200) Slave2 (192.168.1.201) Slave3 (192.168.1.202) Ethernet connections between devices used hubs. I used the following command: [Master] ./ptp4l -i eno1 -m --step_threshold=1 ./phc2sys -a -r -r -m --step_threshold=1 [Slave1-3] ./ptp4l -i enp23s0f0 -s -m --step_threshold=1 ./phc2sys -a -r -r -m --step_threshold=1 Slave 1 and 2 are normally synchronized with Master's time. However, Slave3 is out of sync as "Waiting for ptp4l..." is output in the log of phc2sys. Up to 2 slaves can be synchronized normally, but if you try to configure 3 or more slaves, synchronization will fail. When configuring multiple slaves, are there any items that need to be set separately? Any advice would be appreciated. Regards, _______________________________________________ Linuxptp-users mailing list Linuxptp-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/linuxptp-users
