T

Frank Edwards wrote:
On Friday 16 December 2005 1:00 pm, Lovell Mcilwain 
<[EMAIL PROTECTED]> wrote:
  
I will try this when I get home since my linux machine is not in front 
of me at the moment.  When I run fdisk -l I get the following output:
   Device Boot      Start         End      Blocks   Id  System
/dev/hda1               2        3569    28659960    f  W95 Ext'd 
    
(LBA)
  
/dev/hda2            3570        3700     1052257+  82  Linux swap / 
    
Solaris
  
/dev/hda3   *        3701        7295    28876837+  83  Linux
/dev/hda5               2        3569    28659928+   7  HPFS/NTFS

I did install windows first since I can't get past the problem of grub 
being erased or not functioning if I install windows after linux.  If
I could ever get that to work I would have simply just reinstalled it 
since I don't use windows that much.
    

If you install Windows after Linux and lose the ability to boot Linux, 
try this:

boot from the original install media with the "rescue" option (most of 
the time you can simply type "rescue" at the "boot:" prompt),

follow the prompts to "repair" your system until the filesystems are 
mounted,

switch to console #2 (ALT-F2) and execute "mount" and/or "df" to find 
out which partitions are mounted and where,

use the "chroot" command and specify the mount point of the root 
filesystem on the hard drive (such as "chroot /mnt"),

make sure you have access to the boot partition by mounting it (if 
you're installation did not include a separate partition for boot, this 
command will produce an error -- just ignore it):  "mount /boot"

and last, re-install GRUB with the command 
"grub-install /dev/hda" (change the disk to correspond with the drive 
where GRUB should be installed -- this example uses the Master Boot 
Record -- or choose a partition, in which case the partition must be 
made "active" under DOS/Windoze in order to load GRUB).

You can now unmount /boot (if necessary), and "exit" the chroot command.

Then reboot your system -- CTRL-ALT-DEL is probably easiest -- and GRUB 
should regain control.

  
This sounds extremly heavy.  I will have to find a way to save all of my stuff before doing this obviously.  Is it possible that I can try just doing all of this before re-installing windows to see if that solves the problem?

  
My assumption from what your telling me and what my output is, is that 
my grub entry is correct since it has (hd0,4). If that is the case can 
you tell me what my other options are?  I don't mind wiping my windows 
partition but my linux partition (as it should be) is my most 
    
important 
  
so having to rebuild that just to reinstall windows wouldn't be worth 
    
it :)

Your GRUB entry looks fine.  I'd bet that one of the Windoze files are 
missing, such as NTLDR or similar.
  
If that is the case then is should be able to simply run windows repair and see if it replaces that file to make a bootable partition.
Good luck.
  

Im expecting when I do any of this, my system will blow up for one reason or another so once again I will try to copy as much of my configurations as possible so that I don't loose much time. I guess that will be my Sunday project.
_______________________________________________
LinuxR3000 mailing list
[email protected]
http://lists.pcxperience.com/cgi-bin/mailman/listinfo/linuxr3000
Wiki at http://prinsig.se/weekee/

Reply via email to