Hello everyone!
I am trying to compile LinuxSampler 2.1.1 on the Raspberry Pi 3 with
Raspbian, which is based on Debian buster. The compilation goes fine as
far as I can tell, until it gets to RTMath.cpp:
RTMath.cpp:77:8: error: #error "Sorry, LinuxSampler lacks time stamp code
for your system."
# error "Sorry, LinuxSampler lacks time stamp code for your system."
^~~~~
RTMath.cpp:78:8: error: #error "Please report this error and the CPU you
are using to the LinuxSampler developers mailing list!"
# error "Please report this error and the CPU you are using to the
LinuxSampler developers mailing list!"
So the CPU I am using is the BCM2835 ARMv7, I attached the
/proc/cpuinfo.
Best regards,
Christoph Stelz
processor : 0
model name : ARMv7 Processor rev 4 (v7l)
BogoMIPS : 38.40
Features : half thumb fastmult vfp edsp neon vfpv3 tls vfpv4 idiva idivt
vfpd32 lpae evtstrm crc32
CPU implementer : 0x41
CPU architecture: 7
CPU variant : 0x0
CPU part : 0xd03
CPU revision : 4
processor : 1
model name : ARMv7 Processor rev 4 (v7l)
BogoMIPS : 38.40
Features : half thumb fastmult vfp edsp neon vfpv3 tls vfpv4 idiva idivt
vfpd32 lpae evtstrm crc32
CPU implementer : 0x41
CPU architecture: 7
CPU variant : 0x0
CPU part : 0xd03
CPU revision : 4
processor : 2
model name : ARMv7 Processor rev 4 (v7l)
BogoMIPS : 38.40
Features : half thumb fastmult vfp edsp neon vfpv3 tls vfpv4 idiva idivt
vfpd32 lpae evtstrm crc32
CPU implementer : 0x41
CPU architecture: 7
CPU variant : 0x0
CPU part : 0xd03
CPU revision : 4
processor : 3
model name : ARMv7 Processor rev 4 (v7l)
BogoMIPS : 38.40
Features : half thumb fastmult vfp edsp neon vfpv3 tls vfpv4 idiva idivt
vfpd32 lpae evtstrm crc32
CPU implementer : 0x41
CPU architecture: 7
CPU variant : 0x0
CPU part : 0xd03
CPU revision : 4
Hardware : BCM2835
Revision : a02082
Serial : 00000000c445ff70
Model : Raspberry Pi 3 Model B Rev 1.2
_______________________________________________
Linuxsampler-devel mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/linuxsampler-devel
