This is an automatic generated email to let you know that the following patch were queued at the http://git.linuxtv.org/media_tree.git tree:
Subject: [media] xc5000: support 32MHz & 31.875MHz xtal using the 41.024.5 firmware Author: Michael Krufky <[email protected]> Date: Mon Apr 16 14:59:32 2012 -0300 Rather than loading firmware specific for the xtal frequency, just use the standard firmware and set the xtal frequency after firmware upload. Signed-off-by: Michael Krufky <[email protected]> Signed-off-by: Mauro Carvalho Chehab <[email protected]> drivers/media/common/tuners/xc5000.c | 39 ++++++++++++++++++++++++++++++--- drivers/media/common/tuners/xc5000.h | 1 + 2 files changed, 36 insertions(+), 4 deletions(-) --- http://git.linuxtv.org/media_tree.git?a=commitdiff;h=7d3d0d8d6fd50fd180a6bc3953bb68acf7089b2b diff --git a/drivers/media/common/tuners/xc5000.c b/drivers/media/common/tuners/xc5000.c index 7f98984..eab2ea4 100644 --- a/drivers/media/common/tuners/xc5000.c +++ b/drivers/media/common/tuners/xc5000.c @@ -54,6 +54,7 @@ struct xc5000_priv { struct list_head hybrid_tuner_instance_list; u32 if_khz; + u32 xtal_khz; u32 freq_hz; u32 bandwidth; u8 video_standard; @@ -214,9 +215,9 @@ static const struct xc5000_fw_cfg xc5000a_1_6_114 = { .size = 12401, }; -static const struct xc5000_fw_cfg xc5000c_41_024_5_31875 = { - .name = "dvb-fe-xc5000c-41.024.5-31875.fw", - .size = 16503, +static const struct xc5000_fw_cfg xc5000c_41_024_5 = { + .name = "dvb-fe-xc5000c-41.024.5.fw", + .size = 16497, }; static inline const struct xc5000_fw_cfg *xc5000_assign_firmware(int chip_id) @@ -226,7 +227,7 @@ static inline const struct xc5000_fw_cfg *xc5000_assign_firmware(int chip_id) case XC5000A: return &xc5000a_1_6_114; case XC5000C: - return &xc5000c_41_024_5_31875; + return &xc5000c_41_024_5; } } @@ -572,6 +573,31 @@ static int xc_tune_channel(struct xc5000_priv *priv, u32 freq_hz, int mode) return found; } +static int xc_set_xtal(struct dvb_frontend *fe) +{ + struct xc5000_priv *priv = fe->tuner_priv; + int ret = XC_RESULT_SUCCESS; + + switch (priv->chip_id) { + default: + case XC5000A: + /* 32.000 MHz xtal is default */ + break; + case XC5000C: + switch (priv->xtal_khz) { + default: + case 32000: + /* 32.000 MHz xtal is default */ + break; + case 31875: + /* 31.875 MHz xtal configuration */ + ret = xc_write_reg(priv, 0x000f, 0x8081); + break; + } + break; + } + return ret; +} static int xc5000_fwupload(struct dvb_frontend *fe) { @@ -603,6 +629,8 @@ static int xc5000_fwupload(struct dvb_frontend *fe) } else { printk(KERN_INFO "xc5000: firmware uploading...\n"); ret = xc_load_i2c_sequence(fe, fw->data); + if (XC_RESULT_SUCCESS == ret) + ret = xc_set_xtal(fe); printk(KERN_INFO "xc5000: firmware upload complete...\n"); } @@ -1164,6 +1192,9 @@ struct dvb_frontend *xc5000_attach(struct dvb_frontend *fe, priv->if_khz = cfg->if_khz; } + if (priv->xtal_khz == 0) + priv->xtal_khz = cfg->xtal_khz; + if (priv->radio_input == 0) priv->radio_input = cfg->radio_input; diff --git a/drivers/media/common/tuners/xc5000.h b/drivers/media/common/tuners/xc5000.h index 3396f8e..39a73bf 100644 --- a/drivers/media/common/tuners/xc5000.h +++ b/drivers/media/common/tuners/xc5000.h @@ -34,6 +34,7 @@ struct xc5000_config { u8 i2c_address; u32 if_khz; u8 radio_input; + u32 xtal_khz; int chip_id; }; _______________________________________________ linuxtv-commits mailing list [email protected] http://www.linuxtv.org/cgi-bin/mailman/listinfo/linuxtv-commits
