This is an automatic generated email to let you know that the following patch were queued at the http://git.linuxtv.org/media_tree.git tree:
Subject: [media] rc-core: rename dev->scanmask to dev->scancode_mask Author: David Härdeman <da...@hardeman.nu> Date: Thu Apr 3 20:32:26 2014 -0300 We already have dev->scancode_filter and dev->scancode_wakeup_filter so rename dev->scanmask to dev->scancode_mask for consistency. Signed-off-by: David Härdeman <da...@hardeman.nu> Signed-off-by: Mauro Carvalho Chehab <m.che...@samsung.com> drivers/media/pci/cx88/cx88-input.c | 2 +- drivers/media/pci/ttpci/budget-ci.c | 2 +- drivers/media/rc/rc-main.c | 4 ++-- drivers/media/usb/cx231xx/cx231xx-input.c | 2 +- drivers/media/usb/tm6000/tm6000-input.c | 2 +- include/media/rc-core.h | 5 +++-- 6 files changed, 9 insertions(+), 8 deletions(-) --- http://git.linuxtv.org/media_tree.git?a=commitdiff;h=1bf2d4b473c21ff77f235eec6115876df2bf1cf0 diff --git a/drivers/media/pci/cx88/cx88-input.c b/drivers/media/pci/cx88/cx88-input.c index 93ff6a7..3f1342c 100644 --- a/drivers/media/pci/cx88/cx88-input.c +++ b/drivers/media/pci/cx88/cx88-input.c @@ -478,7 +478,7 @@ int cx88_ir_init(struct cx88_core *core, struct pci_dev *pci) dev->priv = core; dev->open = cx88_ir_open; dev->close = cx88_ir_close; - dev->scanmask = hardware_mask; + dev->scancode_mask = hardware_mask; if (ir->sampling) { dev->driver_type = RC_DRIVER_IR_RAW; diff --git a/drivers/media/pci/ttpci/budget-ci.c b/drivers/media/pci/ttpci/budget-ci.c index 41ce7de..1feeeff 100644 --- a/drivers/media/pci/ttpci/budget-ci.c +++ b/drivers/media/pci/ttpci/budget-ci.c @@ -234,7 +234,7 @@ static int msp430_ir_init(struct budget_ci *budget_ci) break; } if (!budget_ci->ir.full_rc5) - dev->scanmask = 0xff; + dev->scancode_mask = 0xff; error = rc_register_device(dev); if (error) { diff --git a/drivers/media/rc/rc-main.c b/drivers/media/rc/rc-main.c index c3fb8f8..39e4b5f 100644 --- a/drivers/media/rc/rc-main.c +++ b/drivers/media/rc/rc-main.c @@ -285,8 +285,8 @@ static unsigned int ir_establish_scancode(struct rc_dev *dev, * IR tables from other remotes. So, we support specifying a mask to * indicate the valid bits of the scancodes. */ - if (dev->scanmask) - scancode &= dev->scanmask; + if (dev->scancode_mask) + scancode &= dev->scancode_mask; /* First check if we already have a mapping for this ir command */ for (i = 0; i < rc_map->len; i++) { diff --git a/drivers/media/usb/cx231xx/cx231xx-input.c b/drivers/media/usb/cx231xx/cx231xx-input.c index adcdd92..05f0434 100644 --- a/drivers/media/usb/cx231xx/cx231xx-input.c +++ b/drivers/media/usb/cx231xx/cx231xx-input.c @@ -91,7 +91,7 @@ int cx231xx_ir_init(struct cx231xx *dev) dev->init_data.get_key = get_key_isdbt; dev->init_data.ir_codes = cx231xx_boards[dev->model].rc_map_name; /* The i2c micro-controller only outputs the cmd part of NEC protocol */ - dev->init_data.rc_dev->scanmask = 0xff; + dev->init_data.rc_dev->scancode_mask = 0xff; dev->init_data.rc_dev->driver_name = "cx231xx"; dev->init_data.type = RC_BIT_NEC; info.addr = 0x30; diff --git a/drivers/media/usb/tm6000/tm6000-input.c b/drivers/media/usb/tm6000/tm6000-input.c index 8a519f5..26b2ebb 100644 --- a/drivers/media/usb/tm6000/tm6000-input.c +++ b/drivers/media/usb/tm6000/tm6000-input.c @@ -443,7 +443,7 @@ int tm6000_ir_init(struct tm6000_core *dev) /* input setup */ rc->allowed_protocols = RC_BIT_RC5 | RC_BIT_NEC; /* Neded, in order to support NEC remotes with 24 or 32 bits */ - rc->scanmask = 0xffff; + rc->scancode_mask = 0xffff; rc->priv = ir; rc->change_protocol = tm6000_ir_change_protocol; if (dev->int_in.endp) { diff --git a/include/media/rc-core.h b/include/media/rc-core.h index 4f9e187..3047837 100644 --- a/include/media/rc-core.h +++ b/include/media/rc-core.h @@ -80,11 +80,12 @@ enum rc_filter_type { * @enabled_wakeup_protocols: bitmask with the enabled RC_BIT_* wakeup protocols * @scancode_filter: scancode filter * @scancode_wakeup_filter: scancode wakeup filters - * @scanmask: some hardware decoders are not capable of providing the full + * @scancode_mask: some hardware decoders are not capable of providing the full * scancode to the application. As this is a hardware limit, we can't do * anything with it. Yet, as the same keycode table can be used with other * devices, a mask is provided to allow its usage. Drivers should generally * leave this field in blank + * @users: number of current users of the device * @priv: driver-specific data * @keylock: protects the remaining members of the struct * @keypressed: whether a key is currently pressed @@ -139,8 +140,8 @@ struct rc_dev { u64 enabled_wakeup_protocols; struct rc_scancode_filter scancode_filter; struct rc_scancode_filter scancode_wakeup_filter; + u32 scancode_mask; u32 users; - u32 scanmask; void *priv; spinlock_t keylock; bool keypressed; _______________________________________________ linuxtv-commits mailing list linuxtv-commits@linuxtv.org http://www.linuxtv.org/cgi-bin/mailman/listinfo/linuxtv-commits
