On Wed Dec 3 06:02:39 2025 +0200, Vladimir Zapolskiy wrote: > Add device tree bindings documentation for Samsung S5K3M5 image sensor. > > Reviewed-by: Krzysztof Kozlowski <[email protected]> > Signed-off-by: Vladimir Zapolskiy <[email protected]> > Signed-off-by: Sakari Ailus <[email protected]> > Signed-off-by: Hans Verkuil <[email protected]>
Patch committed. Thanks, Hans Verkuil .../bindings/media/i2c/samsung,s5k3m5.yaml | 103 +++++++++++++++++++++ 1 file changed, 103 insertions(+) --- diff --git a/Documentation/devicetree/bindings/media/i2c/samsung,s5k3m5.yaml b/Documentation/devicetree/bindings/media/i2c/samsung,s5k3m5.yaml new file mode 100644 index 000000000000..434f15f64bcd --- /dev/null +++ b/Documentation/devicetree/bindings/media/i2c/samsung,s5k3m5.yaml @@ -0,0 +1,103 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/media/i2c/samsung,s5k3m5.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Samsung S5K3M5 Image Sensor + +description: + Samsung S5K3M5 (ISOCELL 3M5) image sensor is a 13MP image sensor. + The sensor is controlled over a serial camera control bus protocol, + the widest supported output image frame size is 4208x3120 at 30 frames + per second, data output format is RAW10 transferred over 4-lane + MIPI D-PHY interface. + +maintainers: + - Vladimir Zapolskiy <[email protected]> + +allOf: + - $ref: /schemas/media/video-interface-devices.yaml# + +properties: + compatible: + const: samsung,s5k3m5 + + reg: + maxItems: 1 + + clocks: + description: MCLK supply clock. + maxItems: 1 + + reset-gpios: + description: Active low GPIO connected to RESET pad of the sensor. + maxItems: 1 + + afvdd-supply: + description: Autofocus actuator voltage supply, 2.8-3.0 volts. + + vdda-supply: + description: Analogue voltage supply, 2.8 volts. + + vddd-supply: + description: Digital core voltage supply, 1.05 volts. + + vddio-supply: + description: Digital I/O voltage supply, 2.8 or 1.8 volts. + + port: + $ref: /schemas/graph.yaml#/$defs/port-base + additionalProperties: false + + properties: + endpoint: + $ref: /schemas/media/video-interfaces.yaml# + unevaluatedProperties: false + + properties: + data-lanes: + items: + - const: 1 + - const: 2 + - const: 3 + - const: 4 + + required: + - link-frequencies + +required: + - compatible + - reg + - port + +unevaluatedProperties: false + +examples: + - | + #include <dt-bindings/gpio/gpio.h> + + i2c { + #address-cells = <1>; + #size-cells = <0>; + + camera@10 { + compatible = "samsung,s5k3m5"; + reg = <0x10>; + clocks = <&camera_mclk 0>; + assigned-clocks = <&camera_mclk 0>; + assigned-clock-rates = <24000000>; + reset-gpios = <&gpio1 10 GPIO_ACTIVE_LOW>; + vdda-supply = <&vreg_2p8>; + vddd-supply = <&vreg_1p05>; + vddio-supply = <&vreg_1p8>; + + port { + endpoint { + link-frequencies = /bits/ 64 <602500000>; + remote-endpoint = <&mipi_csi2_ep>; + }; + }; + }; + }; +... _______________________________________________ linuxtv-commits mailing list -- [email protected] To unsubscribe send an email to [email protected]
