I have a printer working fine through ipp on an 11.4 installation, but
the exact same setup won't work on a 12.1 installation.

It seems to connect ok, but then the printer status just shows as
"Print file was not accepted" and the print job remains in the queue,
unprinted.

Does anybody have any idea what may be wrong?

Below is the entry for the job in /var/log/cups/error_log

Many thanks, all.

D [24/Feb/2012:14:08:06 +0000] [Job 5] The following messages were
recorded from 14:07:51 to 14:08:06
D [24/Feb/2012:14:08:06 +0000] [Job 5] job-sheets=none,none
D [24/Feb/2012:14:08:06 +0000] [Job 5] argv[0]="WY3"
D [24/Feb/2012:14:08:06 +0000] [Job 5] argv[1]="5"
D [24/Feb/2012:14:08:06 +0000] [Job 5] argv[2]="root"
D [24/Feb/2012:14:08:06 +0000] [Job 5] argv[3]="(stdin)"
D [24/Feb/2012:14:08:06 +0000] [Job 5] argv[4]="1"
D [24/Feb/2012:14:08:06 +0000] [Job 5] argv[5]="finishings=3 number-
up=1 job-uuid=urn:uuid:8c038609-50ca-338d-6894-c94776adbdb7 job-
originating-host-name=localhost time-at-creation=1330091842 time-at-
processing=1330092471 AP_D_InputSlot="
D [24/Feb/2012:14:08:06 +0000] [Job 5] argv[6]="/var/spool/cups/
d00005-001"
D [24/Feb/2012:14:08:06 +0000] [Job 5] envp[0]="CUPS_CACHEDIR=/var/
cache/cups"
D [24/Feb/2012:14:08:06 +0000] [Job 5] envp[1]="CUPS_DATADIR=/usr/
share/cups"
D [24/Feb/2012:14:08:06 +0000] [Job 5] envp[2]="CUPS_DOCROOT=/usr/
share/cups/webcontent"
D [24/Feb/2012:14:08:06 +0000] [Job 5] envp[3]="CUPS_FONTPATH=/usr/
share/cups/fonts"
D [24/Feb/2012:14:08:06 +0000] [Job 5] envp[4]="CUPS_REQUESTROOT=/var/
spool/cups"
D [24/Feb/2012:14:08:06 +0000] [Job 5] envp[5]="CUPS_SERVERBIN=/usr/
lib/cups"
D [24/Feb/2012:14:08:06 +0000] [Job 5] envp[6]="CUPS_SERVERROOT=/etc/
cups"
D [24/Feb/2012:14:08:06 +0000] [Job 5] envp[7]="CUPS_STATEDIR=/var/run/
cups"
D [24/Feb/2012:14:08:06 +0000] [Job 5] envp[8]="HOME=/var/spool/cups/
tmp"
D [24/Feb/2012:14:08:06 +0000] [Job 5] envp[9]="PATH=/usr/lib/cups/
filter:/usr/bin:/usr/sbin:/bin:/usr/bin"
D [24/Feb/2012:14:08:06 +0000] [Job 5]
envp[10]="SERVER_ADMIN=root@UniqueRA"
D [24/Feb/2012:14:08:06 +0000] [Job 5] envp[11]="SOFTWARE=CUPS/1.5.0"
D [24/Feb/2012:14:08:06 +0000] [Job 5] envp[12]="TMPDIR=/var/spool/
cups/tmp"
D [24/Feb/2012:14:08:06 +0000] [Job 5] envp[13]="USER=root"
D [24/Feb/2012:14:08:06 +0000] [Job 5] envp[14]="CUPS_SERVER=/var/run/
cups/cups.sock"
D [24/Feb/2012:14:08:06 +0000] [Job 5]
envp[15]="CUPS_ENCRYPTION=IfRequested"
D [24/Feb/2012:14:08:06 +0000] [Job 5] envp[16]="IPP_PORT=631"
D [24/Feb/2012:14:08:06 +0000] [Job 5] envp[17]="CHARSET=utf-8"
D [24/Feb/2012:14:08:06 +0000] [Job 5] envp[18]="LANG=en_GB.UTF-8"
D [24/Feb/2012:14:08:06 +0000] [Job 5] envp[19]="PPD=/etc/cups/ppd/
WY3.ppd"
D [24/Feb/2012:14:08:06 +0000] [Job 5] envp[20]="RIP_MAX_CACHE=128m"
D [24/Feb/2012:14:08:06 +0000] [Job 5]
envp[21]="CONTENT_TYPE=application/vnd.cups-raw"
D [24/Feb/2012:14:08:06 +0000] [Job 5] envp[22]="DEVICE_URI=http://
IP_ADDRESS:631/UBSPS2-USB1"
D [24/Feb/2012:14:08:06 +0000] [Job 5] envp[23]="PRINTER_INFO=Generic
PCL 5e Printer Foomatic/hpijs-pcl5e (recommended)"
D [24/Feb/2012:14:08:06 +0000] [Job 5] envp[24]="PRINTER_LOCATION="
D [24/Feb/2012:14:08:06 +0000] [Job 5] envp[25]="PRINTER=WY3"
D [24/Feb/2012:14:08:06 +0000] [Job 5]
envp[26]="PRINTER_STATE_REASONS=cups-ipp-conformance-failure-
report,cups-ipp-missing-printer-state-reasons,cups-ipp-missing-
validate-job"
D [24/Feb/2012:14:08:06 +0000] [Job 5]
envp[27]="CUPS_FILETYPE=document"
D [24/Feb/2012:14:08:06 +0000] [Job 5] envp[28]="AUTH_I****"
D [24/Feb/2012:14:08:06 +0000] [Job 5] Started backend /usr/lib/cups/
backend/ipp (PID 11103)
D [24/Feb/2012:14:08:06 +0000] [Job 5] 1 files to send in job...
D [24/Feb/2012:14:08:06 +0000] [Job 5] update_reasons(attr=0(),
s="+connecting-to-device")
D [24/Feb/2012:14:08:06 +0000] [Job 5] op='+', new_reasons=1,
state_reasons=3
D [24/Feb/2012:14:08:06 +0000] [Job 5] STATE: +connecting-to-device
D [24/Feb/2012:14:08:06 +0000] [Job 5] Looking up "IP_ADDRESS"...
D [24/Feb/2012:14:08:06 +0000] [Job 5] hrDeviceDesc="Unknown"
D [24/Feb/2012:14:08:06 +0000] [Job 5] prtGeneralCurrentLocalization
type is 0, expected 2!
D [24/Feb/2012:14:08:06 +0000] [Job 5] Connecting to IP_ADDRESS:631
D [24/Feb/2012:14:08:06 +0000] [Job 5] Connecting to printer.
D [24/Feb/2012:14:08:06 +0000] [Job 5] Set job-printer-state-message
to "Connecting to printer.", current level=INFO
D [24/Feb/2012:14:08:06 +0000] [Job 5] update_reasons(attr=0(), s="-
cups-certificate-error")
D [24/Feb/2012:14:08:06 +0000] [Job 5] op='-', new_reasons=1,
state_reasons=4
D [24/Feb/2012:14:08:06 +0000] [Job 5] update_reasons(attr=0(), s="-
connecting-to-device")
D [24/Feb/2012:14:08:06 +0000] [Job 5] op='-', new_reasons=1,
state_reasons=4
D [24/Feb/2012:14:08:06 +0000] [Job 5] STATE: -connecting-to-device
D [24/Feb/2012:14:08:06 +0000] [Job 5] Connected to printer.
D [24/Feb/2012:14:08:06 +0000] [Job 5] Set job-printer-state-message
to "Connected to printer.", current level=INFO
D [24/Feb/2012:14:08:06 +0000] [Job 5] Connected to IP_ADDRESS:631...
D [24/Feb/2012:14:08:06 +0000] [Job 5] Getting supported attributes...
D [24/Feb/2012:14:08:06 +0000] [Job 5] Get-Printer-Attributes:
successful-ok (successful-ok)
D [24/Feb/2012:14:08:06 +0000] [Job 5] update_reasons(attr=0(),
s="+cups-ipp-conformance-failure-report,cups-ipp-missing-printer-state-
reasons")
D [24/Feb/2012:14:08:06 +0000] [Job 5] op='+', new_reasons=2,
state_reasons=3
D [24/Feb/2012:14:08:06 +0000] [Job 5] document-format-supported (2
values)
D [24/Feb/2012:14:08:06 +0000] [Job 5] [0] = "application/octet-
stream"
D [24/Feb/2012:14:08:06 +0000] [Job 5] [1] = "text/plain"
D [24/Feb/2012:14:08:06 +0000] [Job 5] Validate-Job IPP/2.0
D [24/Feb/2012:14:08:06 +0000] [Job 5] printer-uri="http://IP_ADDRESS:
631/UBSPS2-USB1"
D [24/Feb/2012:14:08:06 +0000] [Job 5] requesting-user-name="root"
D [24/Feb/2012:14:08:06 +0000] [Job 5] job-name="(stdin)"
D [24/Feb/2012:14:08:06 +0000] [Job 5] document-format="application/
octet-stream"
D [24/Feb/2012:14:08:06 +0000] [Job 5] Validate-Job: server-error-
operation-not-supported (server-error-operation-not-supported)
D [24/Feb/2012:14:08:06 +0000] [Job 5] update_reasons(attr=0(),
s="+cups-ipp-conformance-failure-report,cups-ipp-missing-validate-
job")
D [24/Feb/2012:14:08:06 +0000] [Job 5] op='+', new_reasons=2,
state_reasons=3
D [24/Feb/2012:14:08:06 +0000] [Job 5] Print-Job IPP/2.0
D [24/Feb/2012:14:08:06 +0000] [Job 5] printer-uri="http://IP_ADDRESS:
631/UBSPS2-USB1"
D [24/Feb/2012:14:08:06 +0000] [Job 5] requesting-user-name="root"
D [24/Feb/2012:14:08:06 +0000] [Job 5] job-name="(stdin)"
D [24/Feb/2012:14:08:06 +0000] [Job 5] document-format="application/
octet-stream"
D [24/Feb/2012:14:08:06 +0000] [Job 5] Sending file using HTTP/1.1
chunking...
D [24/Feb/2012:14:08:06 +0000] [Job 5] Get-Printer-Attributes:
successful-ok (successful-ok)
D [24/Feb/2012:14:08:06 +0000] [Job 5] Print-Job: server-error-
operation-not-supported (server-error-operation-not-supported)
D [24/Feb/2012:14:08:06 +0000] [Job 5] Set job-printer-state-message
to "Print file was not accepted.", current level=ERROR
D [24/Feb/2012:14:08:06 +0000] [Job 5] Get-Printer-Attributes:
successful-ok (successful-ok)
D [24/Feb/2012:14:08:06 +0000] [Job 5] Get-Printer-Attributes:
successful-ok (successful-ok)
D [24/Feb/2012:14:08:06 +0000] [Job 5] Get-Printer-Attributes:
successful-ok (successful-ok)
D [24/Feb/2012:14:08:06 +0000] [Job 5] Get-Printer-Attributes:
successful-ok (successful-ok)
D [24/Feb/2012:14:08:06 +0000] [Job 5] Get-Printer-Attributes:
successful-ok (successful-ok)
D [24/Feb/2012:14:08:06 +0000] [Job 5] Backend returned status 7
(unknown)
D [24/Feb/2012:14:08:06 +0000] [Job 5] Retrying job on same printer.
D [24/Feb/2012:14:08:06 +0000] [Job 5] End of messages
D [24/Feb/2012:14:08:06 +0000] [Job 5] printer-state=3(idle)
D [24/Feb/2012:14:08:06 +0000] [Job 5] printer-state-message="Print
file was not accepted."
D [24/Feb/2012:14:08:06 +0000] [Job 5] printer-state-reasons=cups-ipp-
conformance-failure-report,cups-ipp-missing-printer-state-reasons,cups-
ipp-missing-validate-job
E [24/Feb/2012:14:08:10 +0000] [Job 5] Print file was not accepted.

-- 
You received this message because you are subscribed to the Linux Users Group.
To post a message, send email to [email protected]
To unsubscribe, send email to [email protected]
For more options, visit our group at 
http://groups.google.com/group/linuxusersgroup
References can be found at: http://goo.gl/anqri
Please remember to abide by our list rules (http://tinyurl.com/LUG-Rules or 
http://cdn.fsdev.net/List-Rules.pdf)

Reply via email to