On Tue, Jan 19, 2016 at 5:03 PM, Peter Hutterer <peter.hutte...@who-t.net>
wrote:
> On Tue, Jan 19, 2016 at 04:29:09PM -0800, Ping Cheng wrote:
> > Group inital values by device types.
> >
> > Signed-off-by: Ping Cheng <pi...@wacom.com>
> > ---
> > v2: rely on device type instead of kernel version, as suggested by Peter.
> > ---
> > wacom.c | 67
> +++++++++++++----------------------------------------------------
> > 1 file changed, 13 insertions(+), 54 deletions(-)
> >
> > diff --git a/wacom.c b/wacom.c
> > index 32a98c4..3f5a725 100644
> > --- a/wacom.c
> > +++ b/wacom.c
> > @@ -211,26 +211,21 @@ static int wacom_intuos_events(struct uinput_info
> *info)
> > set_event(info, UI_SET_KEYBIT, BTN_TOOL_RUBBER);
> > set_event(info, UI_SET_KEYBIT, BTN_TOOL_MOUSE);
> > set_event(info, UI_SET_KEYBIT, BTN_TOOL_LENS);
> > - if (features->type != INTUOS5S &&
> > - features->type != INTUOS5M &&
> > - features->type != INTUOS5L)
> > + if (features->type != INTUOS)
> > set_event(info, UI_SET_KEYBIT, BTN_TOOL_FINGER);
>
> ok, now Im confused. in the previous version you had > INTUOS which
> would've
> excluded a couple of devices. Now you're only excluding the Intuos1. Is
> this
> intended?
>
Yes, it is intentional.
"> INTUOS" meant INTUOS is not included. All types after INTUOS were
included, which are Intuos 3 and later, as well as all Cintitqs. Now, I
don't have those types in order. I can not use > INTUOS any more. In fact,
"> INTUOS" was unnecessary then. The type enum rearrangement was not for
this statement. It was for the if/switch statement you commented below.
> > - set_event(info, UI_SET_KEYBIT, BTN_TOUCH);
> > set_event(info, UI_SET_KEYBIT, BTN_STYLUS2);
> > set_event(info, UI_SET_KEYBIT, BTN_RIGHT);
> > set_event(info, UI_SET_KEYBIT, BTN_LEFT);
> > set_event(info, UI_SET_KEYBIT, BTN_MIDDLE);
> > set_event(info, UI_SET_KEYBIT, BTN_SIDE);
> > set_event(info, UI_SET_KEYBIT, BTN_EXTRA);
> > - if (features->type != INTUOS5S &&
> > - features->type != INTUOS5M &&
> > - features->type != INTUOS5L)
> > - set_event(info, UI_SET_KEYBIT, BTN_7);
> > - set_event(info, UI_SET_KEYBIT, BTN_MIDDLE);
> >
> > - if (features->type != INTUOS5S &&
> > - features->type != INTUOS5M &&
> > - features->type != INTUOS5L) {
> > + if (features->type == INTUOS3S ||
> > + features->type == INTUOS3 ||
> > + features->type == INTUOS3L ||
> > + features->type == CINTIQ ||
> > + features->type == BEE ||
> > + features->type == WACOM_21UX2) {
>
> I'd prefer a switch for simpler fallthrough, but I'm not going to fight too
> hard for this :)
>
Yeah, I paid attention to your suggestion ;-). But, there are only two
states: with RX/Y, or without. We can definitely go with
switch (features->type) {
case INTUOS3S:
case INTUOS3:
case INTUOS3L:
case CINTIQ:
case BEE:
case WACOM_21UX2:
set_event(info, UI_SET_ABSBIT, ABS_RX);
set_event(info, UI_SET_ABSBIT, ABS_RY);
break;
}
Feel free to merge it in when you push the patch. You have my
signed-off-by, either way.
Thank you for your review.
Ping
> > set_event(info, UI_SET_ABSBIT, ABS_RX);
> > set_event(info, UI_SET_ABSBIT, ABS_RY);
> > }
> > @@ -352,26 +347,14 @@ static int wacom_set_events(struct uinput_info
> *info, struct uinput_user_dev *de
> > break;
> > case INTUOS4:
> > case INTUOS4L:
> > - set_event(info, UI_SET_ABSBIT, ABS_Z);
> > - set_event(info, UI_SET_KEYBIT, BTN_7);
> > - set_event(info, UI_SET_KEYBIT, BTN_8);
> > - /* fall trhu */
> > - case INTUOS4S:
> > - set_event(info, UI_SET_KEYBIT, BTN_0);
> > - set_event(info, UI_SET_KEYBIT, BTN_1);
> > - set_event(info, UI_SET_KEYBIT, BTN_2);
> > - set_event(info, UI_SET_KEYBIT, BTN_3);
> > - set_event(info, UI_SET_KEYBIT, BTN_4);
> > - set_event(info, UI_SET_KEYBIT, BTN_5);
> > - set_event(info, UI_SET_KEYBIT, BTN_6);
> > - wacom_intuos_events(info);
> > - break;
> > case INTUOS5M:
> > case INTUOS5L:
> > set_event(info, UI_SET_KEYBIT, BTN_7);
> > set_event(info, UI_SET_KEYBIT, BTN_8);
> > case INTUOS5S:
> > set_event(info, UI_SET_ABSBIT, ABS_Z);
> > + /* fall through */
> > + case INTUOS4S:
> > set_event(info, UI_SET_KEYBIT, BTN_0);
> > set_event(info, UI_SET_KEYBIT, BTN_1);
> > set_event(info, UI_SET_KEYBIT, BTN_2);
> > @@ -416,7 +399,6 @@ static int wacom_set_initial_values(struct
> uinput_info *info,
> > dev->absmax[ABS_WHEEL] = 71;
> > /* fall through */
> > case G4:
> > - /* fall through */
> > case GRAPHIRE:
> > break;
> >
> > @@ -429,45 +411,22 @@ static int wacom_set_initial_values(struct
> uinput_info *info,
> > /* fall through */
> > case INTUOS3S:
> > dev->absmax[ABS_RX] = 4096;
> > - dev->absmax[ABS_Z] = 899;
> > - dev->absmin[ABS_Z] = -900;
> > /* fall through */
> > - case INTUOS:
> > - dev->absmax[ABS_WHEEL] = 1023;
> > - dev->absmax[ABS_TILT_X] = 127;
> > - dev->absmax[ABS_TILT_Y] = 127;
> > - dev->absmin[ABS_RZ] = -900;
> > - dev->absmax[ABS_RZ] = 899;
> > - dev->absmin[ABS_THROTTLE] = -1023;
> > - dev->absmax[ABS_THROTTLE] = 1023;
> > - break;
> > - case PL:
> > - case PTU:
> > - break;
> > - case PENPARTNER:
> > - break;
> > - case TABLETPC:
> > - dev->absmax[ABS_RX] = 1023;
> > - dev->absmax[ABS_RY] = 1023;
> > case INTUOS4S:
> > case INTUOS4:
> > case INTUOS4L:
> > - dev->absmin[ABS_Z] = -900;
> > - dev->absmax[ABS_Z] = 899;
> > - break;
> > case INTUOS5S:
> > case INTUOS5M:
> > case INTUOS5L:
> > - dev->absfuzz[ABS_X] = 4;
> > - dev->absfuzz[ABS_Y] = 4;
> > - dev->absfuzz[ABS_Y] = 4;
> > dev->absmin[ABS_Z] = -900;
> > dev->absmax[ABS_Z] = 899;
> > - dev->absmin[ABS_RZ] = -900;
> > - dev->absmax[ABS_RZ] = 899;
> > + /* fall through */
> > + case INTUOS:
> > dev->absmax[ABS_WHEEL] = 1023;
> > dev->absmax[ABS_TILT_X] = 127;
> > dev->absmax[ABS_TILT_Y] = 127;
> > + dev->absmin[ABS_RZ] = -900;
> > + dev->absmax[ABS_RZ] = 899;
> > dev->absmin[ABS_THROTTLE] = -1023;
> > dev->absmax[ABS_THROTTLE] = 1023;
> > break;
> > --
> > 1.9.1
> >
>
------------------------------------------------------------------------------
Site24x7 APM Insight: Get Deep Visibility into Application Performance
APM + Mobile APM + RUM: Monitor 3 App instances at just $35/Month
Monitor end-to-end web transactions and take corrective actions now
Troubleshoot faster and improve end-user experience. Signup Now!
http://pubads.g.doubleclick.net/gampad/clk?id=267308311&iu=/4140
_______________________________________________
Linuxwacom-devel mailing list
Linuxwacom-devel@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/linuxwacom-devel