> Does the motor spin up, when you insert a floppy or push the little stick in
> the floppy on the right side, which recognizes an inserted disk?
> The error you described, could be caused by a faulty I/O Board (resp. a
> faulty Lisa Light Adapter, depending on your Lisa modell) or by the drive
> itself, due to a faulty step-by-step electronic component, which triggers
> permanently the motor, which moves the head.


Tom, thats right .. basically when I power on the machine the
floppy the step motor moves the head forward until it starts
clicking in place and wont' stop.   It didn't do that before,
only after I had lubricated some of the components so that a
floppy could be inserted and ejected .. From what you're
saying this is a common condition ..

It might be best to just find a replacement drive.

Thanks to the other person for the tip on using my SE for
writing out the DiskCopy images .. I was going to try to
use my 840av .. now I won't ;-)

I wonder, could I just use my SE's floppy in the Lisa?  I 
have a Lisa 2/10 with the H rom version.

Ahh, to the other person who responded, my disk isn't
suffering from stick-tion.  It seeks when told to boot
but reports an error.

Anyone have a spare floppy? (or could I use my SE's ?)

What about hard disk alternatives? I'm only guessing that when
I do eventually get LisaOS to boot on floppy I'll be able
to install it on the hard drive.

-- 
LisaList is sponsored by <http://lowendmac.com/> and...

Shop buy.com and save. <http://lowendmac.com/ad/buy.com.html>

      Support Low End Mac <http://lowendmac.com/lists/support.html>

LisaList info:          <http://lowendmac.com/lists/lisa.html>
  --> AOL users, remove "mailto:";
Send list messages to:  <mailto:[EMAIL PROTECTED]>
To unsubscribe, email:  <mailto:[EMAIL PROTECTED]>
For digest mode, email: <mailto:[EMAIL PROTECTED]>
Subscription questions: <mailto:[EMAIL PROTECTED]>
Archive: <http://www.mail-archive.com/lisalist%40mail.maclaunch.com/>

Using a Mac? Free email & more at Applelinks! http://www.applelinks.com

Reply via email to