Hi Geoff, The ProFile cable is straight through (male to male; pin 1-1, 2-2, etc.)
Although the original Apple cable is a shielded round cable, you can use ordinary ribbon cable with crimp-on connectors. For best results, don't make the cable longer than necessary; 18 to 24 inches works fine. Many Lisa/ProFile connectors have pin 7 blocked (to prevent plugging in a serial cable). You may need to cut pin 7 off the connector on one or both ends of your cable. It is probably easiest to pull these pins out or otherwise deal with them before assembling your cable. Let us know if you have any questions; good luck! James >I've got a functioning Lisa and a functioning Profile (I hope) but no >cable to connect them with. Can anybody on the list help with the pin >out for me so I can build my own? James MacPhail "Think not of engineering as art, [EMAIL PROTECTED] but of art as engineering" Sigma Seven Systems Ltd. [EMAIL PROTECTED] <http://SigmaSevenSystems.com> -- LisaList is sponsored by <http://lowendmac.com/> and... Shop buy.com and save. <http://lowendmac.com/ad/buy.com.html> Support Low End Mac <http://lowendmac.com/lists/support.html> LisaList info: <http://lowendmac.com/lists/lisa.html> --> AOL users, remove "mailto:"; Send list messages to: <mailto:lisalist@mail.maclaunch.com> To unsubscribe, email: <mailto:[EMAIL PROTECTED]> For digest mode, email: <mailto:[EMAIL PROTECTED]> Subscription questions: <mailto:[EMAIL PROTECTED]> Archive: <http://www.mail-archive.com/lisalist%40mail.maclaunch.com/> iPod Accessories for Less at 1-800-iPOD.COM Fast Delivery, Low Price, Good Deal www.1800ipod.com
