You need a DB25 Male to DB25 Male straight through cable (i.e. pin 1
goes to pin 1, pin 2 goes to pin 2......, pin 25 goes to pin 25).
The Lisa motherboard has one of the pin holes plugged, you may need to
use long nose pliers to pull out the corresponding pin so that it will fit.
I suspect that this cable will work, but am not sure:
http://www.jdr.com/interact/item.asp?itemno=CBL-DB25MM-E
Serial cables will _NOT_ work. All 25 (except for the blocked pin)
wires should be connected.
Jerry Chafee wrote:
Hello all and please excuse my post if this is covered elseware,
I have a Lisa with the external Profile drive, but I have lost the cable
that connects them together. I have a number of serial male-to-male cables,
but as you probably know, many of these cables have only a few wires inside
and some are crossover cables.
--
LisaList is sponsored by <http://lowendmac.com/> and...
Shop buy.com and save. <http://lowendmac.com/ad/buy.com.html>
Support Low End Mac <http://lowendmac.com/lists/support.html>
LisaList info: <http://lowendmac.com/lists/lisa.html>
--> AOL users, remove "mailto:";
Send list messages to: <mailto:[email protected]>
To unsubscribe, email: <mailto:[EMAIL PROTECTED]>
For digest mode, email: <mailto:[EMAIL PROTECTED]>
Subscription questions: <mailto:[EMAIL PROTECTED]>
Archive: <http://www.mail-archive.com/lisalist%40mail.maclaunch.com/>
iPod Accessories for Less
at 1-800-iPOD.COM
Fast Delivery, Low Price, Good Deal
www.1800ipod.com
