RE: converting an application from CFServer5.0 to CFMX6.1

[Tom Woestman]

I would be curious if your comparison works as follows:   <cfif "#dispOnces#" is not "#EAMDWG#">   I have ran into a similar error with queries in CF and found that explicitly changing the parameters to strings sometimes works around the automatic conversion errors in CF.   Tom Woestman From: Ron Mast [mailto:[EMAIL PROTECTED] Sent: Tuesday, July 26, 2005 7:00 AM To: list@dfwcfug.org Subject: converting an application from CFServer5.0 to CFMX6.1 Hi All, The application throws no error on the old server, but on CFMX6.1 I get the following error: Error Occurred While Processing Request The value "036053D" cannot be converted to a number         The error occurred in E:\wwwroot\Intranet\AppDrawings\displayDWGData.cfm: line 75 73 :           <cfset downloadableDWG = trim(eamdwg)&"_"&"rev_"&trim(eamrev)&"_dwg.zip"> 74 :           <cfset downloadableDXF = trim(eamdwg)&"_"&"rev_"&trim(eamrev)&"_dxf.zip"> 75 :                   <cfif dispOnces is not EAMDWG>     Can anyone shed some light on this for me please?  Any help would be greatly appreciated. Thanks in advance.   Ron Mast Webmaster Truth Hardware Ph: 507-444-4748 Fx: 507-444-5361 www.truth.com   _______________________________ This e-mail and any files transmitted with it are confidential and are intended solely for the use of the individual to whom they are addressed.  If you are not the intended recipient or the individual responsible for delivering the e-mail to the intended recipient, please be advised that you have received this e-mail in error and that any use, dissemination, forwarding, printing, or copying of this e-mail is strictly prohibited.