On Wed, 2011-03-02 at 14:57 -0500, [email protected] wrote: > Hi Guys. > > What I need is a managed power strip (or similar) that I can remotely > operate over the net.
Usually called PDU > The big kicker is, the hardware in question is DC-powered (24v). That is a kicker, since most PDU's are for AC not DC. Tesla vs Edison :) > So far, the closest thing I've found to what I need is this: > > http://dataprobe.com/iboot_remote_reboot/iboot-dc-power-switch.html > > However, I'm hoping for something a bit cheaper (those are nearly $300 > each) as I'm gonna need at least 75 of them, and more likely closer to > 100. > > Any suggestions? Likely more but came across the following, not cheaper per unit, but can serve more than one. http://www.specpower.com/dc_smartstart_specs.aspx Cisco has DC power units, I assume with remote capability, but not sure if thats a route you can go. Likely made as a dc power supply for their own gear, not a general DC PDU. -- William L. Thomson Jr. Obsidian-Studios, Inc. http://www.obsidian-studios.com --------------------------------------------------------------------- Archive http://marc.info/?l=jaxlug-list&r=1&w=2 RSS Feed http://www.mail-archive.com/[email protected]/maillist.xml Unsubscribe [email protected]
