A 260GS will do vlans just fine. Mikrotik does have weird firmware bugs,
consider every software release "beta". It's simply learning the
difference between what's broken in one version vs another version.
The hardware is decent though, and it will do the trick for what you
want to do.
josh reynolds :: chief information officer
spitwspots :: www.spitwspots.com
On 12/13/2014 05:31 PM, Bob Gustafson wrote:
This is even cheaper: 5 G ports for $36. It is 'managed' but you need
to dig deep into the configuration. A manual is available on-line ->
http://wiki.mikrotik.com/wiki/SwOS
http://www.balticnetworks.com/mikrotik-routerboard-rb-260gs-complete-with-enclosure-and-power-supply-fiber-enabled.html
I have one, but haven't dug very deep.
Don't know if it will do your VLAN
Bob G
On 12/13/2014 08:06 PM, Chris Bagnall wrote:
On 14/12/14 1:56 am, Brian Caouette wrote:
I believe this apu4 has 3 gig ports. I'm curious if i can plug one
into and old hub i have to give me more.
More physical ports, yes. More interfaces in pfSense, no. If you want
the latter, you'll need a VLAN-capable switch. But things like the HP
1810-8G (gigabit on all 8 ports) are so cheap these days you might
prefer just to buy new.
Also if the hub is 100 meg will it bring down the lan port or just
affect this one port and everything on the old hub?
Only everything attached to it - the other ports on the APU wouldn't
be affected. But see above, I don't think it's going to give you what
you want (more interfaces to configure, I presume).
In the future I'd like to get a gig switch and pull cat 5 thru the
house to complement the wireless. Is there an advantage to a managed
switch? I'm not sure what I'd gain with it?
VLAN capability and ability to enable/disable ports remotely are the
obvious ones in a small network. In larger networks, things like span
ports (for IDS), 802.11x port authentication (to stop people plugging
dodgy things into your network), LACP (bonding links between
switches), flow control, etc. etc. make managed switches worth their
weight in gold.
As above, though, the cost difference between a decent (light-)
managed switch and an unmanaged switch is pretty negligible these
days, so there's only a very marginal cost saving to be made, and you
never know when those management features come in really handy.
I use an HP 2510-24G at home, which is probably an overkill. The
cheaper 1810-24G has the basic management capabilities listed above,
and is fanless, which makes it a good choice for a home or small
office environment.
(I've listed HP models because that's what I've experience with, no
doubt other manufacturers have similar models. Just watch out for
some of the cheap Netgears that claim to be 'managed' (model
beginning J I think) - they have a horrible Adobe Air management app
that only works from a Windows PC, and only on the subnet the device
is connected to)
Kind regards,
Chris
_______________________________________________
List mailing list
List@lists.pfsense.org
https://lists.pfsense.org/mailman/listinfo/list
_______________________________________________
List mailing list
List@lists.pfsense.org
https://lists.pfsense.org/mailman/listinfo/list