On 10 Jan 2015, at 03:09, k_o_l <k_...@hotmail.com> wrote: > I’ve installed a second hard drive in my firewall the primary is running > 2.1.5 and the secondary 2.2RC. How do I setup the firewall to allow my to > choose between the two at boot?
This is normally a function of the BIOS. If you go into the BIOS setup menu, you should find an option called ‘boot order’ or similar. Modify that to select your drive of preference to boot from. Some more modern BIOSes have a function key you can hit on startup to bring up a boot menu (often F10) that’ll allow you to select a boot disk on the fly, rather than having to go into the full menu system each time you want to make a change. Kind regards, Chris -- C.M. Bagnall This email is made from 100% recycled electrons _______________________________________________ pfSense mailing list https://lists.pfsense.org/mailman/listinfo/list Support the project with Gold! https://pfsense.org/gold -----Original Message----- From: List [mailto:list-boun...@lists.pfsense.org] On Behalf Of Chris Bagnall Sent: Friday, January 9, 2015 10:31 PM To: pfSense Support and Discussion Mailing List Subject: Re: [pfSense] Installation question I was thinking of more like a GRUB solution _______________________________________________ pfSense mailing list https://lists.pfsense.org/mailman/listinfo/list Support the project with Gold! https://pfsense.org/gold
