Haven't been able to find much on troubleshooting Configuration Baseline failures. I have a baseline setup with a discovery script that runs well on most machines but it is reporting about 200-300 machines (it fluctuates) as failed. Looking at some of them and pulling up the logs I see the following
In DCMReporting.log : Conformant Rule: ******_Baseline_f11b8413_5f8f_4871_bf75_e487c928d848_1_Configuration_PolicyDocument not found No ConfigPoints found for rule:System Center Configuration Manager.ScopeId_****_Baseline_f11b8413_5f8f_4871_bf75_e487c928d848_Configuration_PolicyDocument.1.5****__ScopeId_****_Baseline_f11b8413_5f8f_4871_bf75_e487c928d848_1_Configuration_PolicyDocument Jeff Krueger [email protected]<mailto:[email protected]> Solutions Design Team IT - Henry Ford Health System 248.853.4466 ________________________________ CONFIDENTIALITY NOTICE: This email contains information from the sender that may be CONFIDENTIAL, LEGALLY PRIVILEGED, PROPRIETARY or otherwise protected from disclosure. This email is intended for use only by the person or entity to whom it is addressed. If you are not the intended recipient, any use, disclosure, copying, distribution, printing, or any action taken in reliance on the contents of this email, is strictly prohibited. If you received this email in error, please contact the sending party by reply email, delete the email from your computer system and shred any paper copies. Note to Patients: There are a number of risks you should consider before using e-mail to communicate with us. See our Privacy & Security page on www.henryford.com for more detailed information as well as information concerning MyChart, our new patient portal. If you do not believe that our policy gives you the privacy and security protection you need, do not send e-mail or Internet communications to us.
