News. I updated to R2 SP1.
As far as I know that doesn’t update dism right? (I haven’t updated to ADK 10RC.) Because, now the image isn’t blown up anymore by 2GB by just doing a dism /commit on unchanged content. I only have an issue when I add a language pack, otherwise it works. But with a LP Still shows the language selection in windows setup, but and that also happened before I just didn’t do that: When selecting next, the TS continues. In other words: Adding a LP adds that interruption. Doing it online during B&C doesn’t. Question: What could this when adding a LP to the original wim? How to prevent that? Is there a relation to an unattended.xml at that point? I’m hoping you have an answer and I wouldn’t need to dig into panther :) -R From: [email protected] [mailto:[email protected]] On Behalf Of Daniel Ratliff Sent: Montag, 25. Mai 2015 14:14 To: '[email protected]'; '[email protected]' Subject: RE: [mssms] Build and Capture fails when using dism on wm Anything in the panther logs? -----Original Message----- From: Roland Janus [ <mailto:[email protected]> [email protected]] Sent: Monday, May 25, 2015 08:02 AM Eastern Standard Time To: <mailto:[email protected]> [email protected] Subject: RE: [mssms] Build and Capture fails when using dism on wm Bump? From: [email protected] <mailto:[email protected]> [mailto:[email protected]] On Behalf Of Roland Janus Sent: Freitag, 22. Mai 2015 12:31 To: [email protected] <mailto:[email protected]> Subject: [mssms] Build and Capture fails when using dism on wm 2012R2, CU4 (SP1 is next) The idea was to include language packs and updates into the wim,so I did. What happened then is that b&c applied the wim, ran very quickly (too quickly) through “setup windows and ccm”, rebooted and showed the setup screen. That’s it. So I figured must be an update conflicting and I started to remove some. Long story short: Mounted the image, unmounted the image with commit, but didn’t add or change anything. The image increased 2GB in size and still fails. Basically, mount/unmount causes the increase in size and the failure of B&C. Ideas? -Roland The information transmitted is intended only for the person or entity to which it is addressed and may contain CONFIDENTIAL material. If you receive this material/information in error, please contact the sender and delete or destroy the material/information.
