As i have mentioned in the last thread.... just check out the "testRelay.exe" this is the exectly u want. even u dont need to change the code. It exactly matches ur requirement.
And nxt time post ur counter reply in the same thread. On Fri, Nov 6, 2009 at 1:11 PM, RAJESH AWATE <[email protected]>wrote: > Hello All, > Firstly thank you Ross & Bikramjeet for your reply. > > I just want some more clarification from you on testMPEG4VideoStreamer.exe > application. This application reads the input from test.m4e file and stream > the data. > But my requirement is, continous data is coming over some muticast address > and stream it using this application. Is it possible to customize this test > application > to read data from muticast address and stream it. > My development enviornment is Windows. > FYI, my data is coming over some muticast address, so there is no hardware > input device connected to machine. > Can you please elaborate the following point, > " > If your input device is not named in the file system, but you have (or can > create) an open file (i.e., a "FILE*") for it, then simply use this "FILE*" > instead of the file name in the call to "ByteStreamFileSource::createNew()". > " > Is it possible to create "FILE*" for incoming data over multicast address?, > so that I can use the same in testMPEG4VideoStreamer.exe. > > Is there any other testPrograms/Utility available in Live555 which will > help me to achieve this task. > > Thanks and appreciate your response, > Rajesh > > _______________________________________________ > live-devel mailing list > [email protected] > http://lists.live555.com/mailman/listinfo/live-devel > > -- Thanks and Regards Bikramjeet singh Logic Eastern India Private Limited B-2, Sec- 31, Noida http: www.logiceastern.com Phone: +0120-2455112 ext: 212 Mobile +919971030527
_______________________________________________ live-devel mailing list [email protected] http://lists.live555.com/mailman/listinfo/live-devel
