Hi Ross, Thank you for suggesting the reason for possible failure in streaming testMPEG1or2AudioVideoStreamer behind network firewall. It is indeed the case, as you have correctly pointed that firewall does not support multicast routing. But I face the same problem if I run the testMPEG1or2AudioVideoStreamer in unicast mode also. Can you please advise, why does this problem appear even when I run the testMPEG1or2AudioVideoStreamer in unicast mode.
Regards, Sumeet Kumar ________________________________ ::DISCLAIMER:: ----------------------------------------------------------------------------------------------------------------------- The contents of this e-mail and any attachment(s) are confidential and intended for the named recipient(s) only. It shall not attach any liability on the originator or HCL or its affiliates. Any views or opinions presented in this email are solely those of the author and may not necessarily reflect the opinions of HCL or its affiliates. Any form of reproduction, dissemination, copying, disclosure, modification, distribution and / or publication of this message without the prior written consent of the author of this e-mail is strictly prohibited. If you have received this email in error please delete it and notify the sender immediately. Before opening any mail and attachments please check them for viruses and defect. -----------------------------------------------------------------------------------------------------------------------
_______________________________________________ live-devel mailing list [email protected] http://lists.live555.com/mailman/listinfo/live-devel
