I did try the '-t' option and either the same message came back or I would sometimes get a "usage" message back and it would run through all of the commands and what they mean.
The computer I am using Ubuntu on and the camera are directly wired into the same Internet router. I gave you the external Internet ip address so you could access the camera. If you open up the stream in a media player it is a basketball facility. I also gave you the external address because in the future I will be using this program to hopefully connect to other devices on other networks so I'm making sure the external ip address will work. I currently live stream events from this camera and don't have a problem with that. On Apr 23, 2015 5:38 PM, "Ross Finlayson" <[email protected]> wrote: > I tried these and the files do go into the folder I specified them to. I > have a folder named "record" and the output files go in, only one of them, > and it is empty. > > > If you use the “-P 60” option, then the files should end up in the > directory that you’re in when you ran “openRTSP”. > > > So you may be right with the firewall. > > > Did you also try adding the “-t” option? > > > > Do you have any idea where I would remove these firewalls? > > > You need to talk to your Internet Provider, and/or the Internet Provider > of the network where your server (camera) is located. > > Ross Finlayson > Live Networks, Inc. > http://www.live555.com/ > > > _______________________________________________ > live-devel mailing list > [email protected] > http://lists.live555.com/mailman/listinfo/live-devel > >
_______________________________________________ live-devel mailing list [email protected] http://lists.live555.com/mailman/listinfo/live-devel
