> I have seen from reading the lists that care must be taken to ensure the
> timing is correct between the two streams
Yes. Problems like this are usually caused by not setting proper
“fPresentationTime” values in your (video and audio)
“OnDemandServerMediaSubsession” subclasses (when you deliver each frame).
You should also read
http://lists.live555.com/pipermail/live-devel/2016-January/019856.html
If your H.264 video source is coming from a byte stream (i.e., you’re using
“H264VideoStreamFramer” rather than “H264VideoStreamDiscreteFramer”), then you
can’t expect to get good audio/video synchronization, because the H.264 video
stream parsing code can’t give you accurate presentation times (it can only
give you accurate presentation times relative to the rest of the video stream).
Instead, you’ll need to use a “H264VideoStreamDiscreteFramer”, and set
accurate presentation times when you deliver H.264 NAL units to it.
Ross Finlayson
Live Networks, Inc.
http://www.live555.com/
_______________________________________________
live-devel mailing list
[email protected]
http://lists.live555.com/mailman/listinfo/live-devel
