Re:
1. Re: How to get testOnDemandRTSPServer (unicast) to take a
live h.264 feed coming from a UDP port (Ross Finlayson)
The h.264 comes in as non-RTP, raw UDP packets, to a unicast IP address
(localhost) and -not- in NAL unit per UDP packet.
The UDP sender basically reads complete H.264 frames (SC+SPS+SC+PPS+SC+Iframe)
or SC+Pframe retrieved from storage (where this data is stored in a proprietary
format) and writes them to a UDP port. No RTP is involved here.
The BasicUDPSource running on the same device, listening on that UDP port,
picks up this data as it comes in as the input source of the
H264VideoStreamFramer. Hope that clarifies. Is there a different LIVE555 source
that can process this kind of input? If so which one ?
Regards
Shyam
============
Get Outlook for Android<https://aka.ms/ghei36>
________________________________
From: live-devel <[email protected]> on behalf of
[email protected] <[email protected]>
Sent: Friday, October 25, 2019, 12:02 PM
To: [email protected]
Subject: live-devel Digest, Vol 191, Issue 8
Send live-devel mailing list submissions to
[email protected]
To subscribe or unsubscribe via the World Wide Web, visit
http://lists.live555.com/mailman/listinfo/live-devel
or, via email, send a message with subject or body 'help' to
[email protected]
You can reach the person managing the list at
[email protected]
When replying, please edit your Subject line so it is more specific
than "Re: Contents of live-devel digest..."
Today's Topics:
1. Re: How to get testOnDemandRTSPServer (unicast) to take a
live h.264 feed coming from a UDP port (Ross Finlayson)
2. [live555] same spspps in sdp for different video size for
H264 streaming (Zhang Qian????)
3. Re: [live555] same spspps in sdp for different video size for
H264 streaming (Ross Finlayson)
----------------------------------------------------------------------
Message: 1
Date: Thu, 24 Oct 2019 16:15:43 -0700
From: Ross Finlayson <[email protected]>
To: LIVE555 Streaming Media - development & use
<[email protected]>
Subject: Re: [Live-devel] How to get testOnDemandRTSPServer (unicast)
to take a live h.264 feed coming from a UDP port
Message-ID: <[email protected]>
Content-Type: text/plain; charset=utf-8
> On Oct 24, 2019, at 3:21 PM, Shyam Kaundinya
> <[email protected]> wrote:
>
> My goal is to modify testOnDemandRTSPServer (unicast) to take a live h.264
> feed coming from a UDP port.
Before we can answer your question, we?d need to know exactly what you mean by
?coming from a UDP port?. In other words, how is this H.264 feed being
transmitted to the UDP port in the first place?
- Is it being sent as RTP/UDP packets (one H.264 NAL unit per RTP/UDP packet)?
- Or is it being sent as raw (i.e., non-RTP) UDP packets (again, H.264 NAL unit
per UDP packet)?
- Or is it being sent over UDP in some other way?
And is this stream being sent to a multicast IP address, or to a unicast IP
address (perhaps ?localhost?)?
You?re going to explain a *lot* more about what, specifically, you want to do.
Ross Finlayson
Live Networks, Inc.
http://www.live555.com/
------------------------------
Message: 2
Date: Fri, 25 Oct 2019 02:35:47 +0000
From: Zhang Qian???? <[email protected]>
To: "[email protected]" <[email protected]>
Subject: [Live-devel] [live555] same spspps in sdp for different video
size for H264 streaming
Message-ID: <[email protected]>
Content-Type: text/plain; charset="gb2312"
Hi Ross,
I found the spspps value are same in sprop-parameter-sets for SDP when there
are two H264 streaming wth different video resolution. (ie, 720p and 1080p).
For example.
If I start H264 rtsp streaming with 720p resolution for the first time, the
spspps value in sprop-parameter-sets is right.
Then I start another H264 rtsp streaming with 1080p resolution, the spspps
value in sprop-parameter-sets is same with 720p spspps value. It is reused and
doesn?t update it for this rtsp negotiation.
Is it normal for this behavior?
Thanks.
/Qian
-------------- next part --------------
An HTML attachment was scrubbed...
URL:
<http://lists.live555.com/pipermail/live-devel/attachments/20191025/9b49c529/attachment-0001.htm>
------------------------------
Message: 3
Date: Thu, 24 Oct 2019 19:49:24 -0700
From: Ross Finlayson <[email protected]>
To: LIVE555 Streaming Media - development & use
<[email protected]>
Subject: Re: [Live-devel] [live555] same spspps in sdp for different
video size for H264 streaming
Message-ID: <[email protected]>
Content-Type: text/plain; charset=utf-8
> On Oct 24, 2019, at 7:35 PM, Zhang Qian???? <[email protected]> wrote:
>
> Hi Ross,
>
> I found the spspps value are same in sprop-parameter-sets for SDP when there
> are two H264 streaming wth different video resolution. (ie, 720p and 1080p).
>
> For example.
> If I start H264 rtsp streaming with 720p resolution for the first time, the
> spspps value in sprop-parameter-sets is right.
> Then I start another H264 rtsp streaming with 1080p resolution, the spspps
> value in sprop-parameter-sets is same with 720p spspps value. It is reused
> and doesn?t update it for this rtsp negotiation.
>
> Is it normal for this behavior?
Yes, probably. If you change the resolution (and/or aspect ratio) of your
video stream, then you should probably use a different ?ServerMediaSubsession?
object in your server. I.e., destroy the old one; then create a new one in its
place.
Ross Finlayson
Live Networks, Inc.
http://www.live555.com/
------------------------------
Subject: Digest Footer
_______________________________________________
live-devel mailing list
[email protected]
http://lists.live555.com/mailman/listinfo/live-devel
------------------------------
End of live-devel Digest, Vol 191, Issue 8
******************************************
_______________________________________________
live-devel mailing list
[email protected]
http://lists.live555.com/mailman/listinfo/live-devel
