> On Dec 22, 2022, at 9:30 PM, Arjav Parikh <[email protected]> wrote:
>
> Hi
>
> I am using the RTSP server on an IP camera to render my camera streams. I am
> testing using vlc and ffplay client to connect to the RTSP server running on
> my camera.
>
> I have observed that for Low FPS and GOP the RTSP session fails.
> Ex: FPS is set as 4 and GOP is set as 120 then many times I observe below
> errors in verbose prints enable for vlc -
> live555 demux error: Failed to connect with
> rtsp://192.168.1.157:554/main_stream
> satip stream error: Failed to setup RTSP session
>
> On analysing VLC logs and wireshark packets it is observed that RTSP server
> do not send any response for DESCRIBE.
>
> I have verified by dumping frames into a file and with testOnDemandRTSPServer
> able to stream the file with such configurations. Also using the same RTSP
> server code in different SOC also works.
>
> Can anyone suggest where to debug this?
Rather than using VLC (which is not our software, even though it uses our
software as its RTSP client), I suggest using our command-line RTSP client
“openRTSP”, which is included in the LIVE555 software (in the “testProgs”
directory. See:
http://live555.com/openRTSP/
Just run:
openRTSP rtsp://192.168.1.157:554/main_stream
and see what happens.
Ross Finlayson
Live Networks, Inc.
http://www.live555.com/
_______________________________________________
live-devel mailing list
[email protected]
http://lists.live555.com/mailman/listinfo/live-devel
