The present setup should read
Strainer -transmission cooler -water pump-engine-riser-exhaust I have now re routed it to Strainer-water pump- transmission cooler- engine- riser- exhaust I have eliminated a bunch of sharp turns that were previously copper tube and hose clamps. I eliminated all together 10 hose clamps and have almost straight lines all the way. The engine runs 180 in neutral and goes up to 190 when running, then drops to 170 when the thermostat opens. So far I think it was a good change Regards John
_______________________________________________ Liveaboard mailing list [email protected] To adjust your membership settings over the web http://www.liveaboardnow.org/mailman/listinfo/liveaboard To subscribe send an email to [email protected] To unsubscribe send an email to [email protected] The archives are at http://www.liveaboardnow.org/pipermail/liveaboard/ To search the archives http://www.mail-archive.com/[email protected] The Mailman Users Guide can be found here http://www.gnu.org/software/mailman/mailman-member/index.html
