There is a sink drain tailpiece that glues to either 1.5 or 1.25 PVC. (I forget which) This provides connection to 1.5 marine hose. I used these to provide flexible joints. On my last boat there was a section of sewer hose that had a high point in it. Within a few months of replacement, it would begin to stink. Replacing with PVC, with some bends via heat gun fixed the problem. Lee Haefele Merry Christmas to all! _______________________________________________ Liveaboard mailing list Liveaboard@liveaboardonline.com To adjust your membership settings over the web http://liveaboardonline.com/mailman/listinfo/liveaboard To subscribe send an email to liveaboard-j...@liveaboardonline.com
To unsubscribe send an email to liveaboard-le...@liveaboardonline.com The archives are at http://www.liveaboardonline.com/pipermail/liveaboard/ To search the archives http://www.mail-archive.com/liveaboard@liveaboardnow.org The Mailman Users Guide can be found here http://www.gnu.org/software/mailman/mailman-member/index.html