Doug, its hard to see what the problem is, but can you try this: save the attached patch file in your lives/src directory, then:
patch -p0 < test.patch then make and make install again. There is a chance it will fix the problem. Gabriel. http://lives.sourceforge.net https://www.ohloh.net/accounts/salsaman On Wed, Apr 17, 2013 at 8:22 PM, Doug Webb <[email protected]> wrote: > Looks like I'm using version 3 but I have version 2 installed also. I > think this is the stock install from Ubuntu. Here is a further bt > > doug@doug-desktop:~$ gdb lives > GNU gdb (GDB) 7.5-ubuntu > Copyright (C) 2012 Free Software Foundation, Inc. > License GPLv3+: GNU GPL version 3 or later > <http://gnu.org/licenses/gpl.html> > This is free software: you are free to change and redistribute it. > There is NO WARRANTY, to the extent permitted by law. Type "show copying" > and "show warranty" for details. > This GDB was configured as "x86_64-linux-gnu". > For bug reporting instructions, please see: > <http://www.gnu.org/software/gdb/bugs/>... > Reading symbols from /usr/bin/lives...done. > (gdb) run > Starting program: /usr/bin/lives > [Thread debugging using libthread_db enabled] > Using host libthread_db library "/lib/x86_64-linux-gnu/libthread_db.so.1". > [New Thread 0x7fffec8f6700 (LWP 16345)] > [New Thread 0x7fffe6daa700 (LWP 16346)] > > LiVES 2.0.3 > Copyright 2002-2013 Gabriel Finch ([email protected]) and others. > LiVES comes with ABSOLUTELY NO WARRANTY > This is free software, and you are welcome to redistribute it > under certain conditions; see the file COPYING for details. > > [New Thread 0x7fffe5d53700 (LWP 16363)] > LiVES info: Invalid effect farneback_analyserfarneback_analysersalsaman1 > found in compound effect image_stabilizer, line 4 > > LiVES info: Invalid effect farneback_analyserfarneback_analysersalsaman1 > found in compound effect motion_analyser, line 4 > > [New Thread 0x7fffbed40700 (LWP 16852)] > > Program received signal SIGSEGV, Segmentation fault. > 0x00007ffff6916c30 in g_type_check_instance_cast () > from /usr/lib/x86_64-linux-gnu/libgobject-2.0.so.0 > (gdb) bt > #0 0x00007ffff6916c30 in g_type_check_instance_cast () > from /usr/lib/x86_64-linux-gnu/libgobject-2.0.so.0 > #1 0x00000000005540f8 in draw_block (mt=0x254f5a0, > mt@entry=<error reading variable: Cannot access memory at address > 0x7fffffffcb48>, > cairo=<error reading variable: Cannot access memory at address > 0x7fffffffcab8>, > surf=<error reading variable: Cannot access memory at address > 0x7fffffffcac0>, block=0x25b4100, x1=0, > x2=<error reading variable: Cannot access memory at address > 0x7fffffffcab0>) at multitrack.c:831 > (gdb) > #0 0x00007ffff6916c30 in g_type_check_instance_cast () > from /usr/lib/x86_64-linux-gnu/libgobject-2.0.so.0 > #1 0x00000000005540f8 in draw_block (mt=0x254f5a0, > cairo=<error reading variable: Cannot access memory at address > 0x7fffffffcab8>, > surf=<error reading variable: Cannot access memory at address > 0x7fffffffcac0>, block=0x25b4100, x1=0, > x2=<error reading variable: Cannot access memory at address > 0x7fffffffcab0>) at multitrack.c:831 > (gdb) > #0 0x00007ffff6916c30 in g_type_check_instance_cast () > from /usr/lib/x86_64-linux-gnu/libgobject-2.0.so.0 > #1 0x00000000005540f8 in draw_block (mt=0x254f5a0, > cairo=<error reading variable: Cannot access memory at address > 0x7fffffffcab8>, > surf=<error reading variable: Cannot access memory at address > 0x7fffffffcac0>, block=0x25b4100, x1=0, > x2=<error reading variable: Cannot access memory at address > 0x7fffffffcab0>) at multitrack.c:831 > (gdb) > #0 0x00007ffff6916c30 in g_type_check_instance_cast () > from /usr/lib/x86_64-linux-gnu/libgobject-2.0.so.0 > #1 0x00000000005540f8 in draw_block (mt=0x254f5a0, > cairo=<error reading variable: Cannot access memory at address > 0x7fffffffcab8>, > surf=<error reading variable: Cannot access memory at address > 0x7fffffffcac0>, block=0x25b4100, x1=0, > x2=<error reading variable: Cannot access memory at address > 0x7fffffffcab0>) at multitrack.c:831 > (gdb) > #0 0x00007ffff6916c30 in g_type_check_instance_cast () > from /usr/lib/x86_64-linux-gnu/libgobject-2.0.so.0 > #1 0x00000000005540f8 in draw_block (mt=0x254f5a0, > cairo=<error reading variable: Cannot access memory at address > 0x7fffffffcab8>, > surf=<error reading variable: Cannot access memory at address > 0x7fffffffcac0>, block=0x25b4100, x1=0, > x2=<error reading variable: Cannot access memory at address > 0x7fffffffcab0>) at multitrack.c:831 > (gdb) q > A debugging session is active. > > Inferior 1 [process 16342] will be killed. > > Quit anyway? (y or n) y > Quitting: Couldn't get registers: No such process. > doug@doug-desktop:~$ > > > > > On 13-04-17 02:12 PM, salsaman wrote: > > I need to see a longer backtrace. Can you press return a couple of > > times after entering "bt" ? > > > > What version of gtk are you using, gtk 2 or gtk 3 ? > > > > Regards, > > Gabriel. > > > > > > > > http://lives.sourceforge.net > > https://www.ohloh.net/accounts/salsaman > > > > > > On Wed, Apr 17, 2013 at 4:44 PM, Doug Webb <[email protected] > > <mailto:[email protected]>> wrote: > > > > I couldn't seem to give the -debug arg to lives under gdb so here > > it is > > without. This time it hung up instead of crashing. > > > > > > doug@doug-desktop:~$ gdb lives > > GNU gdb (GDB) 7.5-ubuntu > > Copyright (C) 2012 Free Software Foundation, Inc. > > License GPLv3+: GNU GPL version 3 or later > > <http://gnu.org/licenses/gpl.html> > > This is free software: you are free to change and redistribute it. > > There is NO WARRANTY, to the extent permitted by law. Type "show > > copying" > > and "show warranty" for details. > > This GDB was configured as "x86_64-linux-gnu". > > For bug reporting instructions, please see: > > <http://www.gnu.org/software/gdb/bugs/>... > > Reading symbols from /usr/bin/lives...done. > > (gdb) run > > Starting program: /usr/bin/lives > > [Thread debugging using libthread_db enabled] > > Using host libthread_db library > > "/lib/x86_64-linux-gnu/libthread_db.so.1". > > [New Thread 0x7fffec8f6700 (LWP 12347)] > > [New Thread 0x7fffe6daa700 (LWP 12348)] > > > > LiVES 2.0.3 > > Copyright 2002-2013 Gabriel Finch ([email protected] > > <mailto:[email protected]>) and others. > > LiVES comes with ABSOLUTELY NO WARRANTY > > This is free software, and you are welcome to redistribute it > > under certain conditions; see the file COPYING for details. > > > > [New Thread 0x7fffe5d53700 (LWP 12365)] > > LiVES info: Invalid effect > > farneback_analyserfarneback_analysersalsaman1 > > found in compound effect image_stabilizer, line 4 > > > > LiVES info: Invalid effect > > farneback_analyserfarneback_analysersalsaman1 > > found in compound effect motion_analyser, line 4 > > > > [New Thread 0x7fffbed40700 (LWP 12853)] > > [Thread 0x7fffe5d53700 (LWP 12365) exited] > > > > Program received signal SIGSEGV, Segmentation fault. > > 0x00007ffff6916c30 in g_type_check_instance_cast () > > from /usr/lib/x86_64-linux-gnu/libgobject-2.0.so.0 > > (gdb) bt > > #0 0x00007ffff6916c30 in g_type_check_instance_cast () > > from /usr/lib/x86_64-linux-gnu/libgobject-2.0.so.0 > > #1 0x00000000005540f8 in draw_block (mt=0x254cf80, > > mt@entry=<error reading variable: Cannot access memory at > address > > 0x7fffffffcb48>, > > cairo=<error reading variable: Cannot access memory at address > > 0x7fffffffcab8>, > > surf=<error reading variable: Cannot access memory at address > > 0x7fffffffcac0>, block=0x29b68b0, x1=0, > > x2=<error reading variable: Cannot access memory at address > > 0x7fffffffcab0>) at multitrack.c:831 > > (gdb) > > > > > > > > > > > > > > > ------------------------------------------------------------------------------ > > Precog is a next-generation analytics platform capable of advanced > > analytics on semi-structured data. The platform includes APIs for > building > > apps and a phenomenal toolset for data science. Developers can use > > our toolset for easy data analysis & visualization. Get a free account! > > http://www2.precog.com/precogplatform/slashdotnewsletter > > > > > > _______________________________________________ > > Lives-users mailing list > > [email protected] > > https://lists.sourceforge.net/lists/listinfo/lives-users > > > > ------------------------------------------------------------------------------ > Precog is a next-generation analytics platform capable of advanced > analytics on semi-structured data. The platform includes APIs for building > apps and a phenomenal toolset for data science. Developers can use > our toolset for easy data analysis & visualization. Get a free account! > http://www2.precog.com/precogplatform/slashdotnewsletter > _______________________________________________ > Lives-users mailing list > [email protected] > https://lists.sourceforge.net/lists/listinfo/lives-users >
test.patch
Description: Binary data
------------------------------------------------------------------------------ Precog is a next-generation analytics platform capable of advanced analytics on semi-structured data. The platform includes APIs for building apps and a phenomenal toolset for data science. Developers can use our toolset for easy data analysis & visualization. Get a free account! http://www2.precog.com/precogplatform/slashdotnewsletter
_______________________________________________ Lives-users mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/lives-users
