https://github.com/rastogishubham created 
https://github.com/llvm/llvm-project/pull/83312

The timeout for this test was set to 1.0s which is very low, it should be a 
default of 10s and be increased by a factor of 10 if ASAN is enabled. This will 
help reduce the falkiness of the test, especially in ASAN builds.

>From 53c507046527e04b7faa70ea17cd59b45e724f55 Mon Sep 17 00:00:00 2001
From: Shubham Sandeep Rastogi <srastog...@apple.com>
Date: Wed, 28 Feb 2024 10:28:55 -0800
Subject: [PATCH] Increase timeout to reduce test failure rate.

The timeout for this test was set to 1.0s which is very low, it should
be a default of 10s and be increased by a factor of 10 if ASAN is
enabled. This will help reduce the falkiness of the test, especially in
ASAN builds.
---
 .../API/tools/lldb-dap/launch/TestDAP_launch.py   | 15 +++++++++------
 1 file changed, 9 insertions(+), 6 deletions(-)

diff --git a/lldb/test/API/tools/lldb-dap/launch/TestDAP_launch.py 
b/lldb/test/API/tools/lldb-dap/launch/TestDAP_launch.py
index 04d741c1d47201..635ec4f0baf190 100644
--- a/lldb/test/API/tools/lldb-dap/launch/TestDAP_launch.py
+++ b/lldb/test/API/tools/lldb-dap/launch/TestDAP_launch.py
@@ -44,7 +44,8 @@ def test_termination(self):
         self.dap_server.request_disconnect()
 
         # Wait until the underlying lldb-dap process dies.
-        self.dap_server.process.wait(timeout=10)
+        timeoutval = 10 * (10 if ('ASAN_OPTIONS' in os.environ) else 1)
+        self.dap_server.process.wait(timeout=timeoutval)
 
         # Check the return code
         self.assertEqual(self.dap_server.process.poll(), 0)
@@ -334,14 +335,15 @@ def test_commands(self):
         # Get output from the console. This should contain both the
         # "stopCommands" that were run after the first breakpoint was hit
         self.continue_to_breakpoints(breakpoint_ids)
-        output = self.get_console(timeout=1.0)
+        timeoutval = 10 * (10 if ('ASAN_OPTIONS' in os.environ) else 1)
+        output = self.get_console(timeout=timeoutval)
         self.verify_commands("stopCommands", output, stopCommands)
 
         # Continue again and hit the second breakpoint.
         # Get output from the console. This should contain both the
         # "stopCommands" that were run after the second breakpoint was hit
         self.continue_to_breakpoints(breakpoint_ids)
-        output = self.get_console(timeout=1.0)
+        output = self.get_console(timeout=timeoutval)
         self.verify_commands("stopCommands", output, stopCommands)
 
         # Continue until the program exits
@@ -402,21 +404,22 @@ def test_extra_launch_commands(self):
         self.verify_commands("launchCommands", output, launchCommands)
         # Verify the "stopCommands" here
         self.continue_to_next_stop()
-        output = self.get_console(timeout=1.0)
+        timeoutval = 10 * (10 if ('ASAN_OPTIONS' in os.environ) else 1)
+        output = self.get_console(timeout=timeoutval)
         self.verify_commands("stopCommands", output, stopCommands)
 
         # Continue and hit the second breakpoint.
         # Get output from the console. This should contain both the
         # "stopCommands" that were run after the first breakpoint was hit
         self.continue_to_next_stop()
-        output = self.get_console(timeout=1.0)
+        output = self.get_console(timeout=timeoutval)
         self.verify_commands("stopCommands", output, stopCommands)
 
         # Continue until the program exits
         self.continue_to_exit()
         # Get output from the console. This should contain both the
         # "exitCommands" that were run after the second breakpoint was hit
-        output = self.get_console(timeout=1.0)
+        output = self.get_console(timeout=timeoutval)
         self.verify_commands("exitCommands", output, exitCommands)
 
     @skipIfWindows

_______________________________________________
lldb-commits mailing list
lldb-commits@lists.llvm.org
https://lists.llvm.org/cgi-bin/mailman/listinfo/lldb-commits

Reply via email to