Ah! The issue was in my custom Platform's Attach. It is based on PlatformGDB,
but it seems I bulldozed through a little too fast.
I was missing a call to Process::HijackProcessEvents before calling
Process::Attach
auto listener =
attach_info.GetHijackListener();
if (listener != nullptr)
process_sp->HijackProcessEvents(listener.get());
Thanks,
-Philippe
________________________________________
From: Greg Clayton [gclay...@apple.com]
Sent: Thursday, September 17, 2015 1:12 PM
To: Philippe Lavoie
Cc: Jim Ingham; lldb-dev@lists.llvm.org
Subject: Re: [lldb-dev] SBTarget::AttachToProcessWithID hangs
This sounds like you don't have a private state thread running. The private
state thread watches for private state changes in Process and promotes them
into public state changes as needed. Can you check if
Process::PrivateStateThread() is running? This should be triggered by a call to
StartPrivateStateThread() in "Error Process::Attach(ProcessAttachInfo &)".
Greg
> On Sep 17, 2015, at 10:02 AM, Philippe Lavoie <philippe.lav...@octasic.com>
> wrote:
>
> I am missing the final SetPublicState call.
>
> 1442509021.490000000 Process::SetPrivateState (connected)
> 1442509021.492000000 Process::SetPublicState (state = attaching, restarted =
> 0)
> 1442509021.627000000 Process::SetPrivateState (stopped)
> 1442509021.628000000 Process::SetPrivateState (stopped) stop_id = 1
>
> ________________________________________
> From: Greg Clayton [gclay...@apple.com]
> Sent: Thursday, September 17, 2015 12:55 PM
> To: Philippe Lavoie
> Cc: Jim Ingham; lldb-dev@lists.llvm.org
> Subject: Re: [lldb-dev] SBTarget::AttachToProcessWithID hangs
>
> Here is the output of attaching to a process with ProcessGDBRemote:
>
> (lldb) log enable lldb state
> (lldb) attach 12406
> Process::SetPublicState (state = attaching, restarted = 0)
> Process::SetPrivateState (stopped)
> Process::SetPrivateState (stopped) stop_id = 1
> Process::SetPublicState (state = stopped, restarted = 0)
> Process 12406 stopped
> * thread #1: tid = 0x6f2673, 0x00007fff99688682 libsystem_kernel.dylib read +
> 10, stop reason = signal SIGSTOP, queue = com.apple.main-thread
> frame #0: 0x00007fff99688682 libsystem_kernel.dylib read + 10
> libsystem_kernel.dylib`read:
> -> 0x7fff99688682 <+10>: jae 0x7fff9968868c ; <+20>
> 0x7fff99688684 <+12>: movq %rax, %rdi
> 0x7fff99688687 <+15>: jmp 0x7fff99682c78 ; cerror
> 0x7fff9968868c <+20>: retq
>
>
> So we see the public state was set to eStateAttaching and then it was set to
> eStateStopped. Try this out and let me know what you are seeing.
>
> Greg
>
>
>> On Sep 16, 2015, at 1:41 PM, Philippe Lavoie via lldb-dev
>> <lldb-dev@lists.llvm.org> wrote:
>>
>> It is the AttachToProcessWithID that hangs and never returns, so I cannot
>> use my listener yet.
>>
>> -Philippe
>> ________________________________________
>> From: jing...@apple.com [jing...@apple.com]
>> Sent: Wednesday, September 16, 2015 3:34 PM
>> To: Philippe Lavoie
>> Cc: lldb-dev@lists.llvm.org
>> Subject: Re: [lldb-dev] SBTarget::AttachToProcessWithID hangs
>>
>> Did you try waiting for an event on the listener you've passed to
>> AttachToProcess? The last event after everything is done should be the
>> notification to the public listener (i.e. your test_listener) that the
>> process you attached to has stopped, and nobody is fetching that.
>>
>> Jim
>>
>>> On Sep 16, 2015, at 11:59 AM, Philippe Lavoie via lldb-dev
>>> <lldb-dev@lists.llvm.org> wrote:
>>>
>>>
>>> I am trying to attach to a stopped process on our dsp target using the
>>> SBTarget interface but the call hangs.
>>> What I understand is that it is waiting for events on the "lldb.process"
>>> broadcaster using the "lldb.Target.Attach.attach.hijack" listener.
>>>
>>> Enabling the logs, I see that the process is attached successfully and that
>>> the stop event is generated. It just seems that the event is not seen by
>>> the listener.
>>>
>>> 1442428969.321000000 004B9590 Listener::WaitForEventsInternal (timeout = {
>>> 00000000 }) for lldb.Target.Attach.attach.hijack
>>> 1442428969.321000000 004BC7F4 Broadcaster("opus.remote")::BroadcastEvent
>>> (event_sp = {00A72050 Event: broadcaster = 004BC7F4 (opus.remote), type =
>>> 0x00010000, data = <NULL>}, unique =0) hijack = 00000000
>>> 1442428969.341000000 0049AC50 Broadcaster("lldb.target")::BroadcastEvent
>>> (event_sp = {00A70C78 Event: broadcaster = 0049AC50 (lldb.target), type =
>>> 0x00000002 (modules-loaded), data = {}}, unique =0) hijack = 00000000
>>> 1442428969.341000000 004BC7F4 Broadcaster("opus.remote")::BroadcastEvent
>>> (event_sp = {00A723C8 Event: broadcaster = 004BC7F4 (opus.remote), type =
>>> 0x00010000, data = <NULL>}, unique =0) hijack = 00000000
>>> 1442428969.450000000 004BC394
>>> Broadcaster("lldb.process.internal_state_broadcaster")::BroadcastEvent
>>> (event_sp = {00A723C8 Event: broadcaster = 004BC394
>>> (lldb.process.internal_state_broadcaster), type = 0x00000001, data = {
>>> process = 004BC308 (pid = 1), state = stopped}}, unique =0) hijack =
>>> 00000000
>>> 1442428969.452000000 004BC42C
>>> Listener('lldb.process.internal_state_listener')::AddEvent (event_sp =
>>> {00A723C8})
>>> 1442428969.453000000 031CF700 Listener::WaitForEventsInternal (timeout = {
>>> 00000000 }) for ProcessOpusRemote::AsyncThread
>>> 1442428969.453000000 004BC42C 'lldb.process.internal_state_listener'
>>> Listener::FindNextEventInternal(broadcaster=00000000,
>>> broadcaster_names=00000000[0], event_type_mask=0x00000000, remove=1) event
>>> 00A723C8
>>> 1442428969.459000000 0309F8D4 Listener::StartListeningForEvents
>>> (broadcaster = 004BC5F4, mask = 0x00000020) acquired_mask = 0x00000020 for
>>> Communication::SyncronizeWithReadThread
>>> 1442428969.470000000 Process::ShouldBroadcastEvent (00A723C8) => new state:
>>> stopped, last broadcast state: stopped - YES
>>> 1442428969.471000000 004BC318 Broadcaster("lldb.process")::BroadcastEvent
>>> (event_sp = {00A723C8 Event: broadcaster = 004BC318 (lldb.process), type =
>>> 0x00000001(state-changed), data = { process = 004BC308 (pid = 1), state =
>>> stopped}}, unique =0) hijack = 00000000
>>> 1442428969.473000000 00402598 Listener('lldb.Debugger')::AddEvent (event_sp
>>> = {00A723C8})
>>> 1442428969.474000000 004BC42C Listener::WaitForEventsInternal (timeout = {
>>> 00000000 }) for lldb.process.internal_state_listener
>>>
>>> Here's the code I use to attach.
>>>
>>> SBDebugger::Initialize();
>>>
>>> SBDebugger debugger = lldb::SBDebugger::Create(false);
>>> debugger.SetAsync(true);
>>>
>>> const char* categories [] = { "process", "events", 0 };
>>> if (!debugger.EnableLog("lldb", categories))
>>> return -1;
>>>
>>> pid_t pid = 1;
>>>
>>> SBTarget target = debugger.CreateTargetWithFileAndArch(elffile_name,
>>> "opus2");
>>>
>>> SBError error;
>>> SBListener listener("test_listener");
>>>
>>> SBProcess process = target.AttachToProcessWithID(listener, pid, error);
>>>
>>> if (!process.IsValid())
>>> {
>>> ...
>>>
>>>
>>> I would be grateful for any insight on the cause of this behavior.
>>>
>>> Thanks,
>>> -Philippe
>>> _______________________________________________
>>> lldb-dev mailing list
>>> lldb-dev@lists.llvm.org
>>> http://lists.llvm.org/cgi-bin/mailman/listinfo/lldb-dev
>>
>> _______________________________________________
>> lldb-dev mailing list
>> lldb-dev@lists.llvm.org
>> http://lists.llvm.org/cgi-bin/mailman/listinfo/lldb-dev
>
_______________________________________________
lldb-dev mailing list
lldb-dev@lists.llvm.org
http://lists.llvm.org/cgi-bin/mailman/listinfo/lldb-dev
