We've done something similar in-house running on a Snapdragon with an ARM and a Hexagon DSP. We use Android Studio to debug an app on the ARM that sends work down to the Hexagon, running an app under Linux. On the Hexagon we ran lldb, and were able to debug both apps talking to each other.
-- Qualcomm Innovation Center, Inc. The Qualcomm Innovation Center, Inc. is a member of Code Aurora Forum, a Linux Foundation Collaborative Project > -----Original Message----- > From: lldb-dev [mailto:lldb-dev-boun...@lists.llvm.org] On Behalf Of Greg > Clayton via lldb-dev > Sent: Thursday, September 21, 2017 10:10 AM > To: Ramana <ramana.venka...@gmail.com> > Cc: lldb-dev@lists.llvm.org > Subject: Re: [lldb-dev] lldb_private::RegisterContext vs > lldb_private::RegisterInfoInterface > > > > On Sep 21, 2017, at 5:15 AM, Ramana <ramana.venka...@gmail.com> > wrote: > > > > Sorry, I could not respond yesterday as I was of out of office. > > > >> Interesting. There are two ways to accomplish this: > >> 1 - Treat the CPU as one target and the GPU as another. > >> 2 - Treat the CPU and GPU as one target > >> > >> The tricky things with solution #1 is how to manage switching the > >> targets between the CPU and GPU when events happen (CPU stops, or GPU > >> stops while the other is running or already stopped). We don't have > >> any formal "cooperative targets" yet, but we know they will exist in > >> the future (client/server, vm code/vm debug of vm code, etc) so we > >> will be happy to assist with questions if and when you get there. > > > > I was going along the option #1. Would definitely post here with more > > questions as I progress, thank you. Fortunately, the way OpenVX APIs > > work is, after off-loading the tasks to GPU, they will wait for the > > GPU to complete those tasks before continuing further. And in our > > case, both CPU and GPU can be controlled separately. Given that, do > > you think I still need to bother much about "cooperative targets"? > > If you just want to make two targets that know nothing about each other, then > that is very easy. Is that what you were asking? > > > > >> GPU debugging is tricky since they usually don't have a kernel or > >> anything running on the hardware. Many examples I have seen so far > >> will set a breakpoint in the program at some point by compiling the > >> code with a breakpoint inserted, run to that breakpoint, and then if > >> the user wants to continue, you recompile with breakpoints set at a > >> later place and re-run the entire program again. Is your GPU any different? > > > >> We also discussed how to single step in a GPU program. Since multiple > >> cores on the GPU are concurrently running the same program, there was > >> discussion on how single stepping would work. If you are stepping and > >> run into an if/then statement, do you walk through the if and the > >> else at all times? One GPU professional was saying this is how GPU > >> folks would want to see single stepping happen. So I think there is a > >> lot of stuff we need to think about when debugging GPUs in general. > > > > Thanks for sharing that. Yeah, ours is a little different. Basically, > > from the top level, the affinity in our case is per core of the GPU. I > > am not there yet to discuss more on this. > > ok, let me know when you are ready to ask more questions. > > > > >> So we currently have no cooperative targets in LLDB. This will be the > >> first. > >> We will need to discuss how hand off between the targets will occur > >> and many other aspects. We will be sure to comment when and if you get to > this point. > > > > Thank you. Will post more when I get there. > > Sounds good. > > > > Regards, > > Ramana > > > > On Tue, Sep 19, 2017 at 8:56 PM, Greg Clayton <clayb...@gmail.com> > wrote: > >> > >> On Sep 19, 2017, at 3:32 AM, Ramana <ramana.venka...@gmail.com> > wrote: > >> > >> Thank you so much Greg for your comments. > >> > >> What architecture and os are you looking to support? > >> > >> > >> The OS is Linux and the primary use scenario is remote debugging. > >> Basically > >> http://lists.llvm.org/pipermail/lldb-dev/2017-June/012445.html > >> is what I am trying to achieve and unfortunately that query did not > >> get much attention of the members. > >> > >> > >> Sorry about missing that. I will attempt to address this now: > >> > >> I have to implement a debugger for our HW which comprises of CPU+GPU > >> where the GPU is coded in OpenCL and is accelerated through OpenVX > >> API in C++ application which runs on CPU. Our requirement is we > >> should be able to debug the code running on both CPU and GPU > >> simultaneously with in the same LLDB debug session. > >> > >> > >> Interesting. There are two ways to accomplish this: > >> 1 - Treat the CPU as one target and the GPU as another. > >> 2 - Treat the CPU and GPU as one target > >> > >> There are tricky areas for both, but for sanity I would suggest options #1. > >> > >> The tricky things with solution #1 is how to manage switching the > >> targets between the CPU and GPU when events happen (CPU stops, or GPU > >> stops while the other is running or already stopped). We don't have > >> any formal "cooperative targets" yet, but we know they will exist in > >> the future (client/server, vm code/vm debug of vm code, etc) so we > >> will be happy to assist with questions if and when you get there. > >> > >> Option #2 would be tricky as this would be the first target that has > >> multiple architectures within one process. IF the CPU and GPU be be > >> controlled separately, then I would go with option #1 as LLDB > >> currently always stops all threads in a process when any thread > >> stops. You would also need to implement different register contexts > >> for each thread within such a target. It hasn't been done yet, other > >> than through the OS plug-ins that can provide extra threads to show > >> in case you are doing some sort of user space threading. > >> > >> GPU debugging is tricky since they usually don't have a kernel or > >> anything running on the hardware. Many examples I have seen so far > >> will set a breakpoint in the program at some point by compiling the > >> code with a breakpoint inserted, run to that breakpoint, and then if > >> the user wants to continue, you recompile with breakpoints set at a > >> later place and re-run the entire program again. Is your GPU any > >> different? Since they will be used in an OpenCL context maybe your > >> solution is better? We also had discussions on how to represent the > >> various "waves" or sets of cores running the same program on the GPU. > >> The easiest solution is to make one thread per distinct core on the > >> GPU. The harder way would be to treat a thread as a collection of multiple > cores and each variable value now can have one value per core. > >> > >> We also discussed how to single step in a GPU program. Since multiple > >> cores on the GPU are concurrently running the same program, there was > >> discussion on how single stepping would work. If you are stepping and > >> run into an if/then statement, do you walk through the if and the > >> else at all times? One GPU professional was saying this is how GPU > >> folks would want to see single stepping happen. So I think there is a > >> lot of stuff we need to think about when debugging GPUs in general. > >> > >> Looking at the mailing list archive I see that there were discussions > >> about this feature in LLDB here > >> http://lists.llvm.org/pipermail/lldb-dev/2014-August/005074.html. > >> > >> What is the present status i.e. what works today and what is to be > >> improved of simultaneous multiple target debugging support in LLDB? > >> Were the changes contributed to LLDB mainstream? > >> > >> > >> So we currently have no cooperative targets in LLDB. This will be the > >> first. > >> We will need to discuss how hand off between the targets will occur > >> and many other aspects. We will be sure to comment when and if you get to > this point. > >> > >> How can I access the material for > >> http://llvm.org/devmtg/2014-10/#bof5 > >> (Future directions and features for LLDB) > >> > >> Over the years we have talked about this, but it never really got > >> into any real amount of detail and I don't think the BoF notes will help > >> you > much. > >> > >> Appreciate any help/guidance provided on the same. > >> > >> I do believe approach #1 will work the best. The easiest thing you > >> can do is to insulate LLDB from the GPU by putting it behind a GDB server > boundary. > >> Then we need to really figure out how we want to do GPU debugging. > >> > >> Hopefully this filled in your missing answers. Let me know what > >> questions you have. > >> > >> Greg > >> > >> Thanks, > >> Ramana > >> > >> On Mon, Sep 18, 2017 at 8:46 PM, Greg Clayton <clayb...@gmail.com> > wrote: > >> > >> When supporting a new architecture, our preferred route is to modify > >> lldb-server (a GDB server binary that supports native debugging) to > >> support your architecture. Why? Because this gets you remote > >> debugging for free. If you go this route, then you will subclass a > >> lldb_private::NativeRegisterContext and that will get used by > >> lldb-server (along with lldb_private::NativeProcessProtocol and > >> lldb_private::NativeThreadProtocol). If you are adding a new > >> architecture to Linux, then you will likely just need to subclass > NativeRegisterContext. > >> > >> The other way to go is to subclass lldb_private::Process, > >> lldb_private::Thread and lldb_private::RegisterContext. > >> > >> The nice thing about the lldb_private::Native* subclasses is that you > >> only need to worry about native support. You can use #ifdef and use > >> system header files, where as the non native route, those classes > >> need to be able to debug remotely and you can't rely on system > >> headers (lldb_private::Process, lldb_private::Thread and > >> lldb_private::RegisterContext) since they can be compiled on any > >> system for possibly local debugging (if current arch/vendor/os > >> matches the current system) and remote (if you use lldb-server or another > form for RPC). > >> > >> I would highly suggest getting going the lldb-server route as then > >> you can use system header files that contain the definitions of the > >> registers and you only need to worry about the native architecture. > >> Linux uses ptrace and has much the the common code filtered out into > >> correct classes (posix ptrace, linux specifics, and more. > >> > >> What architecture and os are you looking to support? > >> > >> Greg Clayton > >> > >> On Sep 16, 2017, at 6:28 AM, Ramana <ramana.venka...@gmail.com> > wrote: > >> > >> Thank you Greg for the detailed response. > >> > >> Can you please also shed some light on the NativeRegisterContext. > >> When do we need to subclass NativeRegisterContext and (how) are they > >> related to RegisterContext<OS>_<Arc It appears that not all > >> architectures having RegisterContext<OS>_<Arch> have sub classed > >> NativeRegisterContext. > >> > >> Regards, > >> Ramana > >> > >> On Thu, Sep 14, 2017 at 9:02 PM, Greg Clayton <clayb...@gmail.com> > wrote: > >> > >> Seems like this class was added for testing. RegisterInfoInterface is > >> a class that creates a common API for getting > >> lldb_private::RegisterInfo structures. > >> > >> A RegisterContext<OS>_<Arch> class uses one of these to be able to > >> create a buffer large enough to store all registers defined in the > >> RegisterInfoInterface and will actually read/write there registers > >> to/from the debugged process. RegisterContext also caches registers > >> values so they don't get read multiple times when the process hasn't > >> resumed. A RegisterContext subclass is needed for each architecture > >> so we can dynamically tell LLDB what the registers look like for a given > architecture. > >> It also provides abstractions by letting each register define its > >> registers numbers for Compilers, DWARF, and generic register numbers > >> like PC, SP, FP, return address, and flags registers. This allows the > >> generic part of LLDB to say "I need you to give me the PC register > >> for this thread" and we don't need to know that the register is "eip" > >> on x86, "rip" on x86_64, "r15" on ARM. RegisterContext classes can > >> also determine how registers are > >> read/written: one at a time, or "get all general purpose regs" and > >> "get all FPU regs". So if someone asks a RegisterContext to read the > >> PC, it might go read all GPR regs and then mark them all as valid in > >> the register context buffer cache, so if someone subsequently asks > >> for SP, it will be already cached. > >> > >> So RegisterInfoInterface defines a common way that many > >> RegisterContext classes can inherit from in order to give out the > >> lldb_private::RegisterInfo (which is required by all subclasses of > >> RegisterContext) info for a register context, and RegisterContext is > >> the one that actually will interface with the debugged process in > >> order to read/write and cache those registers as efficiently as possible > >> for > the current program being debugged. > >> > >> On Sep 12, 2017, at 10:59 PM, Ramana via lldb-dev > >> <lldb-dev@lists.llvm.org> > >> wrote: > >> > >> Hi, > >> > >> When deriving RegisterContext<OS>_<Arch>, why some platforms > >> (Arch+OS) are deriving it from lldb_private::RegisterContext while > >> others are deriving from lldb_private::RegisterInfoInterface or in > >> other words how to decide on the base class to derive from between > >> those two and what are the implications? > >> > >> Thanks, > >> Ramana > >> _______________________________________________ > >> lldb-dev mailing list > >> lldb-dev@lists.llvm.org > >> http://lists.llvm.org/cgi-bin/mailman/listinfo/lldb-dev > >> > >> > >> > >> > > _______________________________________________ > lldb-dev mailing list > lldb-dev@lists.llvm.org > http://lists.llvm.org/cgi-bin/mailman/listinfo/lldb-dev _______________________________________________ lldb-dev mailing list lldb-dev@lists.llvm.org http://lists.llvm.org/cgi-bin/mailman/listinfo/lldb-dev